All MIBs › EPPC-MIB › upsEUPSModulesNum
upsEUPSModulesNum
Module: EPPC-MIB
OID (symbolic): EPPC-MIB::upsEUPSModulesNum
OID (numeric): 1.3.6.1.4.1.935.10.1.1.4.1
Node type: OBJECT-TYPE
Type: NonNegativeInteger
Access: read-only
Description: The number of UPS modules inserted to UPS systems. served as the index of the upsEModulesTable. the default value 0 indicate that the UPS system do not have separate UPS module.
What is upsEUPSModulesNum?
Read-only count (0-32) of pluggable power (inverter) modules installed, which also sizes the UPS-module table; 0 means the UPS has no separate power modules to report on. Use this after a hot-swap to confirm the expected number of modules is recognized.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.935.10.1.1.4.1 snmpwalk -v2c -c public <target> EPPC-MIB::upsEUPSModulesNum
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.935.10.1.1.4.1.1 snmpget -v2c -c public <target> EPPC-MIB::upsEUPSModulesNum.1
Start monitoring Three-phase UPS system with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EPPC-MIB::upsEUPSModulesNum OID value, configure state conditions and alerts, and monitor any Three-phase UPS system from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.935 | ppc | EPPC-MIB |
| 1.3.6.1.4.1.935.10 | device | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1 | upsAgent | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1.1 | upsE | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1.1.4 | upsEPowerConverterSystem | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1.1.4.1 | upsEUPSModulesNum | EPPC-MIB |