All MIBs › EPPC-MIB › upsESystemOutputLoad
upsESystemOutputLoad
Module: EPPC-MIB
OID (symbolic): EPPC-MIB::upsESystemOutputLoad
OID (numeric): 1.3.6.1.4.1.935.10.1.1.2.18.1.7
Node type: OBJECT-TYPE
Type: NonNegativeInteger
Access: read-only
Description: The UPS output load in percent of rated capacity.
What is upsESystemOutputLoad?
Read-only UPS output load expressed as a percentage of rated capacity. This is the number to alert on -- consistently running above roughly 80% leaves little headroom for a battery-only failover.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.935.10.1.1.2.18.1.7 snmpwalk -v2c -c public <target> EPPC-MIB::upsESystemOutputLoad
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.935.10.1.1.2.18.1.7.1 snmpget -v2c -c public <target> EPPC-MIB::upsESystemOutputLoad.1
Start monitoring Three-phase UPS system with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EPPC-MIB::upsESystemOutputLoad OID value, configure state conditions and alerts, and monitor any Three-phase UPS system from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.935 | ppc | EPPC-MIB |
| 1.3.6.1.4.1.935.10 | device | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1 | upsAgent | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1.1 | upsE | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1.1.2 | upsESystemSummary | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1.1.2.18 | upsESystemOutputTable | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1.1.2.18.1 | upsESystemOutputEntry | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1.1.2.18.1.7 | upsESystemOutputLoad | EPPC-MIB |