All MIBs › EPPC-MIB › upsESystemInputFrequency
upsESystemInputFrequency
Module: EPPC-MIB
OID (symbolic): EPPC-MIB::upsESystemInputFrequency
OID (numeric): 1.3.6.1.4.1.935.10.1.1.2.16.1.2
Node type: OBJECT-TYPE
Type: NonNegativeInteger
Access: read-only
Description: The measured input frquency from the UPS meters in 0.1Hz.
What is upsESystemInputFrequency?
Read-only measured input line frequency for one phase, in tenths of a Hertz (e.g. 600 = 60.0Hz). Compare against the configured nominal input frequency to see if incoming utility power is within tolerance.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.935.10.1.1.2.16.1.2 snmpwalk -v2c -c public <target> EPPC-MIB::upsESystemInputFrequency
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.935.10.1.1.2.16.1.2.1 snmpget -v2c -c public <target> EPPC-MIB::upsESystemInputFrequency.1
Start monitoring Three-phase UPS system with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EPPC-MIB::upsESystemInputFrequency OID value, configure state conditions and alerts, and monitor any Three-phase UPS system from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.935 | ppc | EPPC-MIB |
| 1.3.6.1.4.1.935.10 | device | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1 | upsAgent | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1.1 | upsE | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1.1.2 | upsESystemSummary | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1.1.2.16 | upsESystemInputTable | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1.1.2.16.1 | upsESystemInputEntry | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1.1.2.16.1.2 | upsESystemInputFrequency | EPPC-MIB |