All MIBs › EPPC-MIB › upsESystemConfigOverTemperatureSetPoint
upsESystemConfigOverTemperatureSetPoint
Module: EPPC-MIB
OID (symbolic): EPPC-MIB::upsESystemConfigOverTemperatureSetPoint
OID (numeric): 1.3.6.1.4.1.935.10.1.1.2.12
Node type: OBJECT-TYPE
Type: NonNegativeInteger
Access: read-write
Description: The maximum temperature allowed before the UPS operation temperature is too high, presented in 0.1 degree.
What is upsESystemConfigOverTemperatureSetPoint?
Read-write threshold, in tenths of a degree, above which the UPS flags an over-temperature condition. Adjust this if the UPS sits in a warmer-than-normal room and the alarm point needs recalibrating.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.935.10.1.1.2.12 snmpwalk -v2c -c public <target> EPPC-MIB::upsESystemConfigOverTemperatureSetPoint
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.935.10.1.1.2.12.1 snmpget -v2c -c public <target> EPPC-MIB::upsESystemConfigOverTemperatureSetPoint.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.935.10.1.1.2.12.1 i <value>
Start monitoring Three-phase UPS system with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EPPC-MIB::upsESystemConfigOverTemperatureSetPoint OID value, configure state conditions and alerts, and monitor any Three-phase UPS system from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.935 | ppc | EPPC-MIB |
| 1.3.6.1.4.1.935.10 | device | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1 | upsAgent | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1.1 | upsE | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1.1.2 | upsESystemSummary | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1.1.2.12 | upsESystemConfigOverTemperatureSetPoint | EPPC-MIB |