EPPC-MIB :: upsESystemConfigInputVoltage

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › EPPC-MIB › upsESystemConfigInputVoltage

upsESystemConfigInputVoltage

Module: EPPC-MIB

OID (symbolic): EPPC-MIB::upsESystemConfigInputVoltage

OID (numeric): 1.3.6.1.4.1.935.10.1.1.2.5

Node type: OBJECT-TYPE

Type: NonNegativeInteger

Access: read-only

Description: The magnitude of the nominal input voltage presented in 0.1 V. On those systems which support read-write access to this object, if there is an attempt to set this variable to a value that is not supported, the request must be rejected and the agent shall respond with an appropriate error message, i.e., badValue for SNMPv1, or inconsistentValue for SNMPv2.

What is upsESystemConfigInputVoltage?

Read-only nominal input voltage the UPS is configured for, in tenths of a volt (e.g. 2200 = 220.0V). Compare this to the live measured input voltage to confirm the unit is wired for the expected mains voltage at the site.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.935.10.1.1.2.5
snmpwalk -v2c -c public <target> EPPC-MIB::upsESystemConfigInputVoltage

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.935.10.1.1.2.5.1
snmpget -v2c -c public <target> EPPC-MIB::upsESystemConfigInputVoltage.1

Start monitoring Three-phase UPS system with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EPPC-MIB::upsESystemConfigInputVoltage OID value, configure state conditions and alerts, and monitor any Three-phase UPS system from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.935ppcEPPC-MIB
1.3.6.1.4.1.935.10deviceEPPC-MIB
1.3.6.1.4.1.935.10.1upsAgentEPPC-MIB
1.3.6.1.4.1.935.10.1.1upsEEPPC-MIB
1.3.6.1.4.1.935.10.1.1.2upsESystemSummaryEPPC-MIB
1.3.6.1.4.1.935.10.1.1.2.5upsESystemConfigInputVoltageEPPC-MIB