All MIBs › EPPC-MIB › upsESystemBypassVoltage
upsESystemBypassVoltage
Module: EPPC-MIB
OID (symbolic): EPPC-MIB::upsESystemBypassVoltage
OID (numeric): 1.3.6.1.4.1.935.10.1.1.2.20.1.3
Node type: OBJECT-TYPE
Type: NonNegativeInteger
Access: read-only
Description: The measured bypass voltage from the UPS meters in 0.1 volts
What is upsESystemBypassVoltage?
Read-only measured voltage on the bypass line for one phase, in tenths of a volt. Relevant once the UPS switches to bypass mode, since connected equipment is then riding directly on this voltage.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.935.10.1.1.2.20.1.3 snmpwalk -v2c -c public <target> EPPC-MIB::upsESystemBypassVoltage
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.935.10.1.1.2.20.1.3.1 snmpget -v2c -c public <target> EPPC-MIB::upsESystemBypassVoltage.1
Start monitoring Three-phase UPS system with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EPPC-MIB::upsESystemBypassVoltage OID value, configure state conditions and alerts, and monitor any Three-phase UPS system from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.935 | ppc | EPPC-MIB |
| 1.3.6.1.4.1.935.10 | device | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1 | upsAgent | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1.1 | upsE | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1.1.2 | upsESystemSummary | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1.1.2.20 | upsESystemBypassTable | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1.1.2.20.1 | upsESystemBypassEntry | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1.1.2.20.1.3 | upsESystemBypassVoltage | EPPC-MIB |