All MIBs › EPPC-MIB › upsESystemBypassCurrent
upsESystemBypassCurrent
Module: EPPC-MIB
OID (symbolic): EPPC-MIB::upsESystemBypassCurrent
OID (numeric): 1.3.6.1.4.1.935.10.1.1.2.20.1.4
Node type: OBJECT-TYPE
Type: NonNegativeInteger
Access: read-only
Description: The measured bypass mandatory from the UPS meters in 0.1 amps
What is upsESystemBypassCurrent?
Read-only measured current on the bypass line for one phase, in tenths of an amp. Useful for confirming load draw while the UPS is operating in bypass mode.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.935.10.1.1.2.20.1.4 snmpwalk -v2c -c public <target> EPPC-MIB::upsESystemBypassCurrent
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.935.10.1.1.2.20.1.4.1 snmpget -v2c -c public <target> EPPC-MIB::upsESystemBypassCurrent.1
Start monitoring Three-phase UPS system with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EPPC-MIB::upsESystemBypassCurrent OID value, configure state conditions and alerts, and monitor any Three-phase UPS system from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.935 | ppc | EPPC-MIB |
| 1.3.6.1.4.1.935.10 | device | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1 | upsAgent | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1.1 | upsE | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1.1.2 | upsESystemSummary | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1.1.2.20 | upsESystemBypassTable | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1.1.2.20.1 | upsESystemBypassEntry | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1.1.2.20.1.4 | upsESystemBypassCurrent | EPPC-MIB |