All MIBs › EPPC-MIB › upsEModuleOutputCurrentS
upsEModuleOutputCurrentS
Module: EPPC-MIB
OID (symbolic): EPPC-MIB::upsEModuleOutputCurrentS
OID (numeric): 1.3.6.1.4.1.935.10.1.1.4.2.1.14
Node type: OBJECT-TYPE
Type: NonNegativeInteger
Access: read-only
Description: The measured upsE module output mandatory from the UPS meters in 0.1 A.
What is upsEModuleOutputCurrentS?
Read-only measured output current on phase S for one power module, in tenths of an amp. Compare against the same module's R/T phase currents to catch a phase imbalance within that module.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.935.10.1.1.4.2.1.14 snmpwalk -v2c -c public <target> EPPC-MIB::upsEModuleOutputCurrentS
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.935.10.1.1.4.2.1.14.1 snmpget -v2c -c public <target> EPPC-MIB::upsEModuleOutputCurrentS.1
Start monitoring Three-phase UPS system with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EPPC-MIB::upsEModuleOutputCurrentS OID value, configure state conditions and alerts, and monitor any Three-phase UPS system from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.935 | ppc | EPPC-MIB |
| 1.3.6.1.4.1.935.10 | device | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1 | upsAgent | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1.1 | upsE | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1.1.4 | upsEPowerConverterSystem | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1.1.4.2 | upsEModulesTable | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1.1.4.2.1 | upsEModulesEntry | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1.1.4.2.1.14 | upsEModuleOutputCurrentS | EPPC-MIB |