All MIBs › EPPC-MIB › upsELoadSegment2AutoOnTimer
upsELoadSegment2AutoOnTimer
Module: EPPC-MIB
OID (symbolic): EPPC-MIB::upsELoadSegment2AutoOnTimer
OID (numeric): 1.3.6.1.4.1.935.10.1.1.5.9
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The load segment is automatically turned on after a selected delay if it has been shutdown due to on battery.
What is upsELoadSegment2AutoOnTimer?
Read-write delay, in seconds, after which Load Segment 2 automatically switches back on once it has been shut down due to running on battery. Controls how quickly that segment's equipment is restored once conditions allow.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.935.10.1.1.5.9 snmpwalk -v2c -c public <target> EPPC-MIB::upsELoadSegment2AutoOnTimer
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.935.10.1.1.5.9.1 snmpget -v2c -c public <target> EPPC-MIB::upsELoadSegment2AutoOnTimer.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.935.10.1.1.5.9.1 i <value>
Start monitoring Three-phase UPS system with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EPPC-MIB::upsELoadSegment2AutoOnTimer OID value, configure state conditions and alerts, and monitor any Three-phase UPS system from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.935 | ppc | EPPC-MIB |
| 1.3.6.1.4.1.935.10 | device | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1 | upsAgent | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1.1 | upsE | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1.1.5 | upsELoadSegment | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1.1.5.9 | upsELoadSegment2AutoOnTimer | EPPC-MIB |