All MIBs › EPPC-MIB › upsEEnvironmentTemperatureHighSetPoint
upsEEnvironmentTemperatureHighSetPoint
Module: EPPC-MIB
OID (symbolic): EPPC-MIB::upsEEnvironmentTemperatureHighSetPoint
OID (numeric): 1.3.6.1.4.1.935.10.1.1.6.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The set point for high temperature warning, in 0.1 degrees. This value must be greater than upsEEnvironmentTemperatureLowSetPoint, and the least significant digit must be zero.
What is upsEEnvironmentTemperatureHighSetPoint?
Read-write high-temperature alarm threshold, in tenths of a degree, for the external sensor; it must be set higher than the low set point and its last digit must be zero. Tune this to match the safe operating range of the room the sensor is monitoring.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.935.10.1.1.6.1.2 snmpwalk -v2c -c public <target> EPPC-MIB::upsEEnvironmentTemperatureHighSetPoint
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.935.10.1.1.6.1.2.1 snmpget -v2c -c public <target> EPPC-MIB::upsEEnvironmentTemperatureHighSetPoint.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.935.10.1.1.6.1.2.1 i <value>
Start monitoring Three-phase UPS system with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EPPC-MIB::upsEEnvironmentTemperatureHighSetPoint OID value, configure state conditions and alerts, and monitor any Three-phase UPS system from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.935 | ppc | EPPC-MIB |
| 1.3.6.1.4.1.935.10 | device | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1 | upsAgent | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1.1 | upsE | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1.1.6 | upsEEnvironment | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1.1.6.1 | upsEEnvironmentTemperature | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1.1.6.1.2 | upsEEnvironmentTemperatureHighSetPoint | EPPC-MIB |