All MIBs › EPPC-MIB › upsEEnvironmentHumidityOffset
upsEEnvironmentHumidityOffset
Module: EPPC-MIB
OID (symbolic): EPPC-MIB::upsEEnvironmentHumidityOffset
OID (numeric): 1.3.6.1.4.1.935.10.1.1.6.2.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The offset to calibrate humidity of EMD, in %.
What is upsEEnvironmentHumidityOffset?
Read-write calibration offset, as a percentage, applied to the external environmental humidity sensor's reading. Use this to correct a sensor that reads consistently high or low compared to a known-good reference.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.935.10.1.1.6.2.6 snmpwalk -v2c -c public <target> EPPC-MIB::upsEEnvironmentHumidityOffset
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.935.10.1.1.6.2.6.1 snmpget -v2c -c public <target> EPPC-MIB::upsEEnvironmentHumidityOffset.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.935.10.1.1.6.2.6.1 i <value>
Start monitoring Three-phase UPS system with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EPPC-MIB::upsEEnvironmentHumidityOffset OID value, configure state conditions and alerts, and monitor any Three-phase UPS system from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.935 | ppc | EPPC-MIB |
| 1.3.6.1.4.1.935.10 | device | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1 | upsAgent | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1.1 | upsE | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1.1.6 | upsEEnvironment | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1.1.6.2 | upsEEnvironmentHumidity | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1.1.6.2.6 | upsEEnvironmentHumidityOffset | EPPC-MIB |