All MIBs › EPPC-MIB › upsEControlOutputOnDelay
upsEControlOutputOnDelay
Module: EPPC-MIB
OID (symbolic): EPPC-MIB::upsEControlOutputOnDelay
OID (numeric): 1.3.6.1.4.1.935.10.1.1.8.2
Node type: OBJECT-TYPE
Type: NonNegativeInteger
Access: read-write
Description: Setting this value to other than zero will cause the UPS output to turn on after the number of seconds.
What is upsEControlOutputOnDelay?
Read-write countdown, in seconds; setting it to any nonzero value schedules the UPS output to turn back on after that many seconds. Use this to stagger power restoration to downstream equipment.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.935.10.1.1.8.2 snmpwalk -v2c -c public <target> EPPC-MIB::upsEControlOutputOnDelay
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.935.10.1.1.8.2.1 snmpget -v2c -c public <target> EPPC-MIB::upsEControlOutputOnDelay.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.935.10.1.1.8.2.1 i <value>
Start monitoring Three-phase UPS system with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EPPC-MIB::upsEControlOutputOnDelay OID value, configure state conditions and alerts, and monitor any Three-phase UPS system from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.935 | ppc | EPPC-MIB |
| 1.3.6.1.4.1.935.10 | device | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1 | upsAgent | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1.1 | upsE | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1.1.8 | upsEControl | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1.1.8.2 | upsEControlOutputOnDelay | EPPC-MIB |