All MIBs › EPPC-MIB › positiveChargeVotlage
positiveChargeVotlage
Module: EPPC-MIB
OID (symbolic): EPPC-MIB::positiveChargeVotlage
OID (numeric): 1.3.6.1.4.1.935.10.1.1.3.12.1.3
Node type: OBJECT-TYPE
Type: NonNegativeInteger
Access: read-only
Description: The measured positive charger voltage from the UPS meters in 0.1 volts
What is positiveChargeVotlage?
Read-only measured positive-rail voltage produced by a charger module, in tenths of a volt. Compare across installed modules to spot one that is undercharging relative to its peers.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.935.10.1.1.3.12.1.3 snmpwalk -v2c -c public <target> EPPC-MIB::positiveChargeVotlage
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.935.10.1.1.3.12.1.3.1 snmpget -v2c -c public <target> EPPC-MIB::positiveChargeVotlage.1
Start monitoring Three-phase UPS system with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EPPC-MIB::positiveChargeVotlage OID value, configure state conditions and alerts, and monitor any Three-phase UPS system from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.935 | ppc | EPPC-MIB |
| 1.3.6.1.4.1.935.10 | device | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1 | upsAgent | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1.1 | upsE | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1.1.3 | upsEBatterySystem | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1.1.3.12 | upsEChargerModulesTable | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1.1.3.12.1 | upsEChargerModulesEntry | EPPC-MIB |
| 1.3.6.1.4.1.935.10.1.1.3.12.1.3 | positiveChargeVotlage | EPPC-MIB |