All MIBs › ENTERASYS-VLAN-INTERFACE-MIB › etsysVlanInterfaceRowStatus
etsysVlanInterfaceRowStatus
Module: ENTERASYS-VLAN-INTERFACE-MIB
OID (symbolic): ENTERASYS-VLAN-INTERFACE-MIB::etsysVlanInterfaceRowStatus
OID (numeric): 1.3.6.1.4.1.5624.1.2.22.1.3.1.4
Node type: OBJECT-TYPE
Type: RowStatus
Access: read-create
Description: This object manages the creation and deletion this entry.
active - Indicates that this entry is available for use by the managed device. Transitions to this state will cause a a MIB-II interface to be created by the managed entity and mapped to the specified VLAN. The etsysVlanInterfaceIfIndex object will return the ifIndex of the newly created MIB-II interface. The ifEntry associated with this entry will only be allowed to have an ifAdminStatus and ifOperStatus of up(1) and will be read-only.
notInService - Indicates that this entry exists in the agent but is unavailable for use. The etsysVlanInterfaceIfIndex object will return a value of 0 for entries in this state. State transitions from the active(1) state will cause the MIB-II interface mapped to this VLAN to be deleted.
notReady - Should not be possible.
createAndWait - A new entry will be created in this table for the specified VLAN and the new entry will transition to the notInService state.
createAndGo - A new entry will be created in this table for the specified VLAN and the new entry will transition to the active state.
destroy - Deletes this row and any MIB-II interface that may be associated with it.
What is etsysVlanInterfaceRowStatus?
This RowStatus object creates, activates, or destroys the mapping between a VLAN ID and a MIB-II interface in etsysVlanInterfaceTable; transitioning to active(1) causes the agent to actually create the MIB-II interface (fixed as ifAdminStatus/ifOperStatus up and read-only), while notInService or destroy removes it. Admins use this as the trigger to dynamically provision or tear down a routable Layer 3 interface for a given VLAN. For example, setting this to createAndGo(4) for VLAN 300 causes the switch to create a new MIB-II interface mapped to VLAN 300 and immediately bring it into active use.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5624 | enterasys | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1 | etsysMibs | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1.2 | etsysModules | ENTERASYS-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5624.1.2.22 | etsysVlanInterfaceMIB | ENTERASYS-VLAN-INTERFACE-MIB |
| 1.3.6.1.4.1.5624.1.2.22.1 | etsysVlanInterface | ENTERASYS-VLAN-INTERFACE-MIB |
| 1.3.6.1.4.1.5624.1.2.22.1.3 | etsysVlanInterfaceTable | ENTERASYS-VLAN-INTERFACE-MIB |
| 1.3.6.1.4.1.5624.1.2.22.1.3.1 | etsysVlanInterfaceEntry | ENTERASYS-VLAN-INTERFACE-MIB |
| 1.3.6.1.4.1.5624.1.2.22.1.3.1.4 | etsysVlanInterfaceRowStatus | ENTERASYS-VLAN-INTERFACE-MIB |