ENTERASYS-RS-232-MIB-EXT-MIB :: etsysRs232Vt100DsrTimeout

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › ENTERASYS-RS-232-MIB-EXT-MIB › etsysRs232Vt100DsrTimeout

etsysRs232Vt100DsrTimeout

Module: ENTERASYS-RS-232-MIB-EXT-MIB

OID (symbolic): ENTERASYS-RS-232-MIB-EXT-MIB::etsysRs232Vt100DsrTimeout

OID (numeric): 1.3.6.1.4.1.5624.1.2.77.1.1.1.1.2

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: This object indicates the current timeout value in seconds to wait for a reply to a Device Status Request VT100 ANSI escape sequence.

What is etsysRs232Vt100DsrTimeout?

This value sets how long the device waits for a reply after sending its VT100 Device Status Request before giving up. An admin can tune this if attached terminal equipment or long serial cabling introduces extra reply latency, avoiding false negatives in terminal detection. Setting this to 5 would make the device wait five seconds for a VT100 DSR reply before assuming no compatible terminal is attached, since the object's units are defined in seconds.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.77.1.1.1.1.2
snmpwalk -v2c -c public <target> ENTERASYS-RS-232-MIB-EXT-MIB::etsysRs232Vt100DsrTimeout

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.77.1.1.1.1.2.1
snmpget -v2c -c public <target> ENTERASYS-RS-232-MIB-EXT-MIB::etsysRs232Vt100DsrTimeout.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.5624.1.2.77.1.1.1.1.2.1 i <value>

Start monitoring Enterasys Networks switch (legacy, later Extreme Networks)/router (RS-232 console port extensions) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ENTERASYS-RS-232-MIB-EXT-MIB::etsysRs232Vt100DsrTimeout OID value, configure state conditions and alerts, and monitor any Enterasys Networks switch (legacy, later Extreme Networks)/router (RS-232 console port extensions) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.5624enterasysENTERASYS-MIB-NAMES
1.3.6.1.4.1.5624.1etsysMibsENTERASYS-MIB-NAMES
1.3.6.1.4.1.5624.1.2etsysModulesENTERASYS-MIB-NAMES
Numeric OIDNameModule
1.3.6.1.4.1.5624.1.2.77etsysRs232MibExtMIBENTERASYS-RS-232-MIB-EXT-MIB
1.3.6.1.4.1.5624.1.2.77.1etsysRs232MibExtObjectsENTERASYS-RS-232-MIB-EXT-MIB
1.3.6.1.4.1.5624.1.2.77.1.1etsysRs232MibExtVt100ENTERASYS-RS-232-MIB-EXT-MIB
1.3.6.1.4.1.5624.1.2.77.1.1.1etsysRs232Vt100ExtTableENTERASYS-RS-232-MIB-EXT-MIB
1.3.6.1.4.1.5624.1.2.77.1.1.1.1etsysRs232Vt100ExtEntryENTERASYS-RS-232-MIB-EXT-MIB
1.3.6.1.4.1.5624.1.2.77.1.1.1.1.2etsysRs232Vt100DsrTimeoutENTERASYS-RS-232-MIB-EXT-MIB