ENTERASYS-NAT-MIB :: etsysNatIpv4ConfigInspectDNS

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsENTERASYS-NAT-MIBetsysNatIpv4ConfigInspectDNS

etsysNatIpv4ConfigInspectDNS

Module: ENTERASYS-NAT-MIB

OID (symbolic): ENTERASYS-NAT-MIB::etsysNatIpv4ConfigInspectDNS

OID (numeric): 1.3.6.1.4.1.5624.1.2.75.1.2.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object contains the state of NAT IPv4 Inspect/Fix up DNS. NAT DNS packet inspection and fix up consists of parsing DNS request or response packets, identifying IP addresses contained within that may need to be NAT'ed, and fixing up the DNS packet with the appropriate NAT translations. - `disabled', NAT does not inspect DNS packets that are being forwarded by the NAT process. - `enabled', NAT inspects DNS packets that are being forwarded by the NAT process.

What is etsysNatIpv4ConfigInspectDNS?

This turns on or off DNS packet inspection/fix-up for NAT, where the device rewrites IP addresses embedded inside DNS request and response payloads as they pass through. Enable it when internal DNS servers return addresses that need to match the NAT-translated view seen by clients on the other side; it's disabled by default.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.75.1.2.2
snmpwalk -v2c -c public <target> ENTERASYS-NAT-MIB::etsysNatIpv4ConfigInspectDNS

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.75.1.2.2.1
snmpget -v2c -c public <target> ENTERASYS-NAT-MIB::etsysNatIpv4ConfigInspectDNS.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.5624.1.2.75.1.2.2.1 i <value>

Start monitoring Enterasys Networks router/Layer 3 switch (legacy, later Extreme Networks) (Network Address Translation) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ENTERASYS-NAT-MIB::etsysNatIpv4ConfigInspectDNS OID value, configure state conditions and alerts, and monitor any Enterasys Networks router/Layer 3 switch (legacy, later Extreme Networks) (Network Address Translation) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.5624enterasysENTERASYS-MIB-NAMES
1.3.6.1.4.1.5624.1etsysMibsENTERASYS-MIB-NAMES
1.3.6.1.4.1.5624.1.2etsysModulesENTERASYS-MIB-NAMES
Numeric OIDNameModule
1.3.6.1.4.1.5624.1.2.75etsysNatMIBENTERASYS-NAT-MIB
1.3.6.1.4.1.5624.1.2.75.1etsysNatGlobalENTERASYS-NAT-MIB
1.3.6.1.4.1.5624.1.2.75.1.2etsysNatGlobalIpv4ConfigENTERASYS-NAT-MIB
1.3.6.1.4.1.5624.1.2.75.1.2.2etsysNatIpv4ConfigInspectDNSENTERASYS-NAT-MIB