All MIBs › ENTERASYS-NAT-MIB › etsysNatIpv4ConfigFinRstTimeoutHalfClosedStatus
etsysNatIpv4ConfigFinRstTimeoutHalfClosedStatus
Module: ENTERASYS-NAT-MIB
OID (symbolic): ENTERASYS-NAT-MIB::etsysNatIpv4ConfigFinRstTimeoutHalfClosedStatus
OID (numeric): 1.3.6.1.4.1.5624.1.2.75.1.2.12
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object indicates if the IPv4 TCP FIN/RST timeout will apply to bindings only when the hardware connections have aged out. - `disabled', indicates the IPv4 TCP FIN/RST timeout does not apply to half closed bindings. - `enabled', indicates the IPv4 TCP FIN/RST timeout applies to half closed bindings.
What is etsysNatIpv4ConfigFinRstTimeoutHalfClosedStatus?
This controls whether the fast FIN/RST cleanup timeout (etsysNatIpv4ConfigFinRstTimeout) also applies to half-closed TCP connections, i.e. bindings whose hardware fast-path connection has already aged out. Enabled (the default) applies the short timeout to those half-closed bindings too; disabled excludes them from the fast cleanup.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.75.1.2.12 snmpwalk -v2c -c public <target> ENTERASYS-NAT-MIB::etsysNatIpv4ConfigFinRstTimeoutHalfClosedStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.75.1.2.12.1 snmpget -v2c -c public <target> ENTERASYS-NAT-MIB::etsysNatIpv4ConfigFinRstTimeoutHalfClosedStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5624.1.2.75.1.2.12.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> etsysNatIpv4ConfigFinRstTimeoutHalfClosedStatus.1
Start monitoring Enterasys Networks router/Layer 3 switch (legacy, later Extreme Networks) (Network Address Translation) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ENTERASYS-NAT-MIB::etsysNatIpv4ConfigFinRstTimeoutHalfClosedStatus OID value, configure state conditions and alerts, and monitor any Enterasys Networks router/Layer 3 switch (legacy, later Extreme Networks) (Network Address Translation) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5624 | enterasys | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1 | etsysMibs | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1.2 | etsysModules | ENTERASYS-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5624.1.2.75 | etsysNatMIB | ENTERASYS-NAT-MIB |
| 1.3.6.1.4.1.5624.1.2.75.1 | etsysNatGlobal | ENTERASYS-NAT-MIB |
| 1.3.6.1.4.1.5624.1.2.75.1.2 | etsysNatGlobalIpv4Config | ENTERASYS-NAT-MIB |
| 1.3.6.1.4.1.5624.1.2.75.1.2.12 | etsysNatIpv4ConfigFinRstTimeoutHalfClosedStatus | ENTERASYS-NAT-MIB |