All MIBs › ENTERASYS-MIRROR-CONFIG-MIB › etsysMirrorDestinationNextAvailableIndex
etsysMirrorDestinationNextAvailableIndex
Module: ENTERASYS-MIRROR-CONFIG-MIB
OID (symbolic): ENTERASYS-MIRROR-CONFIG-MIB::etsysMirrorDestinationNextAvailableIndex
OID (numeric): 1.3.6.1.4.1.5624.1.2.72.2.1
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: This object indicates the numerically lowest available index within this entity, which may be used for the value of etsysMirrorDestinationControlIndex in the creation of a new entry in the etsysMirrorDestinationControlTable.
An index is considered available if the index value falls within the range of 1 to (newLeaf with max dest groups) and is not being used to index an existing entry in the etsysMirrorDestinationControlTable contained within this entity.
A value of zero indicates that all of the entries in the etsysMirrorDestinationControlTable are currently in use.
This value SHOULD only be considered a guideline for management creation of etsysMirrorDestinationControlTable entries, there is no requirement on management to create entries based upon this index value.
What is etsysMirrorDestinationNextAvailableIndex?
This value suggests the lowest unused index an admin could use for etsysMirrorDestinationControlIndex when creating a new row in the destination control table, or reports 0 if the table is completely full. Admins can read it as a convenience hint before creating a new mirror destination group, though nothing requires them to actually use the suggested index. A value of 0 would tell the admin every available mirror destination group slot is currently in use.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.72.2.1 snmpwalk -v2c -c public <target> ENTERASYS-MIRROR-CONFIG-MIB::etsysMirrorDestinationNextAvailableIndex
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.72.2.1.1 snmpget -v2c -c public <target> ENTERASYS-MIRROR-CONFIG-MIB::etsysMirrorDestinationNextAvailableIndex.1
Start monitoring Enterasys Networks switch (legacy, later Extreme Networks)/router (port mirroring/SPAN config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ENTERASYS-MIRROR-CONFIG-MIB::etsysMirrorDestinationNextAvailableIndex OID value, configure state conditions and alerts, and monitor any Enterasys Networks switch (legacy, later Extreme Networks)/router (port mirroring/SPAN config) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5624 | enterasys | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1 | etsysMibs | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1.2 | etsysModules | ENTERASYS-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5624.1.2.72 | etsysMirrorConfigMIB | ENTERASYS-MIRROR-CONFIG-MIB |
| 1.3.6.1.4.1.5624.1.2.72.2 | etsysMirrorConfig | ENTERASYS-MIRROR-CONFIG-MIB |
| 1.3.6.1.4.1.5624.1.2.72.2.1 | etsysMirrorDestinationNextAvailableIndex | ENTERASYS-MIRROR-CONFIG-MIB |