ENTERASYS-JUMBO-ETHERNET-FRAME-MIB :: etsysJumboEnetFrameMtu

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › ENTERASYS-JUMBO-ETHERNET-FRAME-MIB › etsysJumboEnetFrameMtu

etsysJumboEnetFrameMtu

Module: ENTERASYS-JUMBO-ETHERNET-FRAME-MIB

OID (symbolic): ENTERASYS-JUMBO-ETHERNET-FRAME-MIB::etsysJumboEnetFrameMtu

OID (numeric): 1.3.6.1.4.1.5624.1.2.34.1.1.1.1.2

Node type: OBJECT-TYPE

Type: Integer32

Access: read-only

Description: The MTU for this interface when etsysJumboEnetFrameEnable is enabled. The managed entity will reflect this value in ifMtu when the passing of jumbo frames is enabled on this interface.

What is etsysJumboEnetFrameMtu?

This object reports the MTU size that applies to the interface when jumbo Ethernet frame passing is enabled, and the device reflects this same value in the standard ifMtu object from IF-MIB once jumbo frames are active. An administrator checks this to know the actual maximum frame size the interface will support with jumbo frames turned on, useful when planning end-to-end MTU consistency across a network path. If this reports 9216, that's the largest frame size the interface will accept once jumbo frame support is active.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.34.1.1.1.1.2
snmpwalk -v2c -c public <target> ENTERASYS-JUMBO-ETHERNET-FRAME-MIB::etsysJumboEnetFrameMtu

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.34.1.1.1.1.2.1
snmpget -v2c -c public <target> ENTERASYS-JUMBO-ETHERNET-FRAME-MIB::etsysJumboEnetFrameMtu.1

Start monitoring Enterasys Networks switch (legacy, later Extreme Networks) (jumbo frame support) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ENTERASYS-JUMBO-ETHERNET-FRAME-MIB::etsysJumboEnetFrameMtu OID value, configure state conditions and alerts, and monitor any Enterasys Networks switch (legacy, later Extreme Networks) (jumbo frame support) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.5624enterasysENTERASYS-MIB-NAMES
1.3.6.1.4.1.5624.1etsysMibsENTERASYS-MIB-NAMES
1.3.6.1.4.1.5624.1.2etsysModulesENTERASYS-MIB-NAMES
Numeric OIDNameModule
1.3.6.1.4.1.5624.1.2.34etsysJumboEthernetFrameMIBENTERASYS-JUMBO-ETHERNET-FRAME-MIB
1.3.6.1.4.1.5624.1.2.34.1etsysJumboEthernetFrameENTERASYS-JUMBO-ETHERNET-FRAME-MIB
1.3.6.1.4.1.5624.1.2.34.1.1etsysJumboEnetFrameControlENTERASYS-JUMBO-ETHERNET-FRAME-MIB
1.3.6.1.4.1.5624.1.2.34.1.1.1etsysJumboEnetFrameTableENTERASYS-JUMBO-ETHERNET-FRAME-MIB
1.3.6.1.4.1.5624.1.2.34.1.1.1.1etsysJumboEnetFrameEntryENTERASYS-JUMBO-ETHERNET-FRAME-MIB
1.3.6.1.4.1.5624.1.2.34.1.1.1.1.2etsysJumboEnetFrameMtuENTERASYS-JUMBO-ETHERNET-FRAME-MIB