All MIBs › ENTERASYS-IMAGE-VALIDATION-MIB › etsysImageValidationPeriod
etsysImageValidationPeriod
Module: ENTERASYS-IMAGE-VALIDATION-MIB
OID (symbolic): ENTERASYS-IMAGE-VALIDATION-MIB::etsysImageValidationPeriod
OID (numeric): 1.3.6.1.4.1.5624.1.2.47.1.1.2
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: The maximum number of seconds to monitor the new image after it has booted. If any of the selected validation operations are not successfully completed within this interval, a reset will be issued to load the prior operational image.
What is etsysImageValidationPeriod?
This object sets, in seconds and defaulting to 600, the maximum time to monitor a newly booted image; if the selected validation operations are not all completed successfully within this window, the switch resets and loads the prior operational image. An admin tunes this to give the new image enough time to complete startup tasks (loading config, responding to ping/SNMP) before the validation window expires and triggers a rollback. Setting it to 300 would give a newly booted image 5 minutes to pass all selected validation checks before an automatic rollback occurs.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.47.1.1.2 snmpwalk -v2c -c public <target> ENTERASYS-IMAGE-VALIDATION-MIB::etsysImageValidationPeriod
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.47.1.1.2.1 snmpget -v2c -c public <target> ENTERASYS-IMAGE-VALIDATION-MIB::etsysImageValidationPeriod.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5624.1.2.47.1.1.2.1 i <value>
Start monitoring Enterasys Networks switch (legacy, later Extreme Networks)/router (firmware image validation/recovery) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ENTERASYS-IMAGE-VALIDATION-MIB::etsysImageValidationPeriod OID value, configure state conditions and alerts, and monitor any Enterasys Networks switch (legacy, later Extreme Networks)/router (firmware image validation/recovery) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5624 | enterasys | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1 | etsysMibs | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1.2 | etsysModules | ENTERASYS-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5624.1.2.47 | etsysImageValidationMIB | ENTERASYS-IMAGE-VALIDATION-MIB |
| 1.3.6.1.4.1.5624.1.2.47.1 | etsysImageValidationObjects | ENTERASYS-IMAGE-VALIDATION-MIB |
| 1.3.6.1.4.1.5624.1.2.47.1.1 | etsysImageValidationConfig | ENTERASYS-IMAGE-VALIDATION-MIB |
| 1.3.6.1.4.1.5624.1.2.47.1.1.2 | etsysImageValidationPeriod | ENTERASYS-IMAGE-VALIDATION-MIB |