All MIBs › ENTERASYS-IMAGE-VALIDATION-MIB › etsysImageValidationOperations
etsysImageValidationOperations
Module: ENTERASYS-IMAGE-VALIDATION-MIB
OID (symbolic): ENTERASYS-IMAGE-VALIDATION-MIB::etsysImageValidationOperations
OID (numeric): 1.3.6.1.4.1.5624.1.2.47.1.1.3
Node type: OBJECT-TYPE
Type: Bits
Access: read-write
Description: The operations that will be used to validate the new image during the etsysImageValidationPeriod.
etsysImageValidationConfig -
The successful loading of the start-up configuration.
etsysImageValidationIcmp -
The successful reception of an ICMP echo reply from the host specified in etsysImageValidationIcmpAddress.
etsysImageValidationSnmp -
The successful reception of an SNMP request from the host specified in etsysImageValidationSnmpAddress. If a host is not specified, an SNMP request from any host will be considered a success.
If all of the selected validation operations are not successfully completed within the etsysImageValidationPeriod, a reset will be issued to load the prior operational image.
What is etsysImageValidationOperations?
This BITS object selects which checks are used to validate a newly booted image within etsysImageValidationPeriod: successful startup-configuration load, receipt of an ICMP echo reply from the host in etsysImageValidationIcmpAddress, and/or receipt of an SNMP request from the host in etsysImageValidationSnmpAddress; if any selected check fails to complete in time, the switch reverts to the prior image. An admin selects which combination of checks must all pass for the new firmware to be considered successfully validated, tailoring validation to what the network actually expects to see from a healthy device. Selecting both the config-load and ICMP checks means the switch will only keep the new image if its startup config loads correctly and a specified host answers a ping within the validation period.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.47.1.1.3 snmpwalk -v2c -c public <target> ENTERASYS-IMAGE-VALIDATION-MIB::etsysImageValidationOperations
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.47.1.1.3.1 snmpget -v2c -c public <target> ENTERASYS-IMAGE-VALIDATION-MIB::etsysImageValidationOperations.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5624.1.2.47.1.1.3.1 s <value>
Start monitoring Enterasys Networks switch (legacy, later Extreme Networks)/router (firmware image validation/recovery) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ENTERASYS-IMAGE-VALIDATION-MIB::etsysImageValidationOperations OID value, configure state conditions and alerts, and monitor any Enterasys Networks switch (legacy, later Extreme Networks)/router (firmware image validation/recovery) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5624 | enterasys | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1 | etsysMibs | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1.2 | etsysModules | ENTERASYS-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5624.1.2.47 | etsysImageValidationMIB | ENTERASYS-IMAGE-VALIDATION-MIB |
| 1.3.6.1.4.1.5624.1.2.47.1 | etsysImageValidationObjects | ENTERASYS-IMAGE-VALIDATION-MIB |
| 1.3.6.1.4.1.5624.1.2.47.1.1 | etsysImageValidationConfig | ENTERASYS-IMAGE-VALIDATION-MIB |
| 1.3.6.1.4.1.5624.1.2.47.1.1.3 | etsysImageValidationOperations | ENTERASYS-IMAGE-VALIDATION-MIB |