All MIBs › ENTERASYS-IMAGE-VALIDATION-MIB › etsysImageValidationIcmpAddressType
etsysImageValidationIcmpAddressType
Module: ENTERASYS-IMAGE-VALIDATION-MIB
OID (symbolic): ENTERASYS-IMAGE-VALIDATION-MIB::etsysImageValidationIcmpAddressType
OID (numeric): 1.3.6.1.4.1.5624.1.2.47.1.1.4
Node type: OBJECT-TYPE
Type: InetAddressType
Access: read-write
Description: The address type of the etsysImageValidationIcmpAddress object. These objects are used when the ICMP echo reply validation operation has been selected.
What is etsysImageValidationIcmpAddressType?
This object specifies the address type (defaulting to ipv4) of the host address stored in etsysImageValidationIcmpAddress, used when the ICMP echo reply validation check is selected. An admin sets this to match whichever address family (IPv4 or IPv6) the monitoring host uses for the ping-based image validation check. Setting it to ipv6 tells the switch to interpret etsysImageValidationIcmpAddress as an IPv6 address for the ICMP validation check.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.47.1.1.4 snmpwalk -v2c -c public <target> ENTERASYS-IMAGE-VALIDATION-MIB::etsysImageValidationIcmpAddressType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.47.1.1.4.1 snmpget -v2c -c public <target> ENTERASYS-IMAGE-VALIDATION-MIB::etsysImageValidationIcmpAddressType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5624.1.2.47.1.1.4.1 s <value>
Start monitoring Enterasys Networks switch (legacy, later Extreme Networks)/router (firmware image validation/recovery) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ENTERASYS-IMAGE-VALIDATION-MIB::etsysImageValidationIcmpAddressType OID value, configure state conditions and alerts, and monitor any Enterasys Networks switch (legacy, later Extreme Networks)/router (firmware image validation/recovery) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5624 | enterasys | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1 | etsysMibs | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1.2 | etsysModules | ENTERASYS-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5624.1.2.47 | etsysImageValidationMIB | ENTERASYS-IMAGE-VALIDATION-MIB |
| 1.3.6.1.4.1.5624.1.2.47.1 | etsysImageValidationObjects | ENTERASYS-IMAGE-VALIDATION-MIB |
| 1.3.6.1.4.1.5624.1.2.47.1.1 | etsysImageValidationConfig | ENTERASYS-IMAGE-VALIDATION-MIB |
| 1.3.6.1.4.1.5624.1.2.47.1.1.4 | etsysImageValidationIcmpAddressType | ENTERASYS-IMAGE-VALIDATION-MIB |