All MIBs › ENTERASYS-IEEE802DOT11EXT-MIB › etsysDot11ExtResetOptions
etsysDot11ExtResetOptions
Module: ENTERASYS-IEEE802DOT11EXT-MIB
OID (symbolic): ENTERASYS-IEEE802DOT11EXT-MIB::etsysDot11ExtResetOptions
OID (numeric): 1.3.6.1.4.1.5624.1.2.9.1.2.1.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: noReset (0) No reset is performed. A 'get' on this object always returns this value.
resetRadioCardIfNecessary (1) Some parameters can only be given to the card at initialization time, and if any of these are changed, a card reset will be necessary for them to go into place. The card will be reset at this time if any of those parameters have indeed been changed.
resetRadioCardRegardless (2) Forces the radio card to reset, even if no radio card parameters have been changed.
What is etsysDot11ExtResetOptions?
Controls whether changing radio card parameters forces a card reset: noReset always reads back as its value, resetRadioCardIfNecessary resets only when a parameter that requires it was changed, and resetRadioCardRegardless forces a reset unconditionally. Set this to resetRadioCardRegardless if you need to guarantee new radio settings take effect immediately.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.9.1.2.1.1.4 snmpwalk -v2c -c public <target> ENTERASYS-IEEE802DOT11EXT-MIB::etsysDot11ExtResetOptions
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.9.1.2.1.1.4.1 snmpget -v2c -c public <target> ENTERASYS-IEEE802DOT11EXT-MIB::etsysDot11ExtResetOptions.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5624.1.2.9.1.2.1.1.4.1 i <value>
Start monitoring Enterasys Networks wireless AP/controller (legacy, later Extreme Networks) (802.11 extensions, WEP/link-test) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ENTERASYS-IEEE802DOT11EXT-MIB::etsysDot11ExtResetOptions OID value, configure state conditions and alerts, and monitor any Enterasys Networks wireless AP/controller (legacy, later Extreme Networks) (802.11 extensions, WEP/link-test) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5624 | enterasys | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1 | etsysMibs | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1.2 | etsysModules | ENTERASYS-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5624.1.2.9 | etsysDot11ExtMIB | ENTERASYS-IEEE802DOT11EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.9.1 | etsysDot11ExtObjects | ENTERASYS-IEEE802DOT11EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.9.1.2 | etsysDot11ExtGeneral | ENTERASYS-IEEE802DOT11EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.9.1.2.1 | etsysDot11ExtGeneralTable | ENTERASYS-IEEE802DOT11EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.9.1.2.1.1 | etsysDot11ExtGeneralEntry | ENTERASYS-IEEE802DOT11EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.9.1.2.1.1.4 | etsysDot11ExtResetOptions | ENTERASYS-IEEE802DOT11EXT-MIB |