All MIBs › ENTERASYS-IEEE802DOT11EXT-MIB › etsysDot11ExtIntraBSSRelay
etsysDot11ExtIntraBSSRelay
Module: ENTERASYS-IEEE802DOT11EXT-MIB
OID (symbolic): ENTERASYS-IEEE802DOT11EXT-MIB::etsysDot11ExtIntraBSSRelay
OID (numeric): 1.3.6.1.4.1.5624.1.2.9.1.2.1.1.8
Node type: OBJECT-TYPE
Type: EnabledStatus
Access: read-write
Description: When this mode is enabled the AP entity within the PC Card will relay frames to destined for stations associated with it and will NOT forward them to the bridging entity within the AP. When this mode is set to disabled, the AP entity within the PC Card will not relay frames from wireless client(s) to station(s) associated with it, instead forwards frames to the bridging entity within the AP.
This object must be saved across a system reset and/or a power cycle.
What is etsysDot11ExtIntraBSSRelay?
When enabled, the AP's radio relays frames directly between wireless clients associated with it instead of forwarding them through the AP's wired bridging entity. Disable it if you want all client-to-client traffic to pass through and be visible to upstream switches/firewalls rather than being relayed at the radio.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.9.1.2.1.1.8 snmpwalk -v2c -c public <target> ENTERASYS-IEEE802DOT11EXT-MIB::etsysDot11ExtIntraBSSRelay
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.9.1.2.1.1.8.1 snmpget -v2c -c public <target> ENTERASYS-IEEE802DOT11EXT-MIB::etsysDot11ExtIntraBSSRelay.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5624.1.2.9.1.2.1.1.8.1 s <value>
Start monitoring Enterasys Networks wireless AP/controller (legacy, later Extreme Networks) (802.11 extensions, WEP/link-test) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ENTERASYS-IEEE802DOT11EXT-MIB::etsysDot11ExtIntraBSSRelay OID value, configure state conditions and alerts, and monitor any Enterasys Networks wireless AP/controller (legacy, later Extreme Networks) (802.11 extensions, WEP/link-test) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5624 | enterasys | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1 | etsysMibs | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1.2 | etsysModules | ENTERASYS-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5624.1.2.9 | etsysDot11ExtMIB | ENTERASYS-IEEE802DOT11EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.9.1 | etsysDot11ExtObjects | ENTERASYS-IEEE802DOT11EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.9.1.2 | etsysDot11ExtGeneral | ENTERASYS-IEEE802DOT11EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.9.1.2.1 | etsysDot11ExtGeneralTable | ENTERASYS-IEEE802DOT11EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.9.1.2.1.1 | etsysDot11ExtGeneralEntry | ENTERASYS-IEEE802DOT11EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.9.1.2.1.1.8 | etsysDot11ExtIntraBSSRelay | ENTERASYS-IEEE802DOT11EXT-MIB |