All MIBs › ENTERASYS-IEEE802DOT11EXT-MIB › etsysDot11ExtBridgeMode
etsysDot11ExtBridgeMode
Module: ENTERASYS-IEEE802DOT11EXT-MIB
OID (symbolic): ENTERASYS-IEEE802DOT11EXT-MIB::etsysDot11ExtBridgeMode
OID (numeric): 1.3.6.1.4.1.5624.1.2.9.1.2.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: CURRENT Access Point bridge mode state.
In workgroup mode all communications between clients passes through the Access Point.
LAN-to-LAN mode is the improved name for 802.11. LAN-to-LAN used to be called full-bridge pre-802.11. This mode is a method of connecting two wired LAN's via a wireless link, also referred to as Point-to-Point mode.
LAN-to-LAN-HUB mode allows the interconnection of multiple (ie. more than two) wired LAN's via wireless links, also referred to as Point-to-MultiPoint mode.
When operating in multimode the Access Point can simultaneously operate in both workgroup mode and either Point-to-Point or Point-to-MultiPoint modes.
This object must be saved across a system reset and/or a power cycle.
What is etsysDot11ExtBridgeMode?
Sets the AP's current bridge mode: workgroup (all client traffic passes through the AP), LAN-to-LAN point-to-point, or LAN-to-LAN multipoint (hub). Choose lanToLanEndpoint to bridge two wired LANs over a wireless link, or lanToLanMultipoint to hub several sites together; the setting persists across reboots.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.9.1.2.1.1.3 snmpwalk -v2c -c public <target> ENTERASYS-IEEE802DOT11EXT-MIB::etsysDot11ExtBridgeMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.9.1.2.1.1.3.1 snmpget -v2c -c public <target> ENTERASYS-IEEE802DOT11EXT-MIB::etsysDot11ExtBridgeMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5624.1.2.9.1.2.1.1.3.1 i <value>
Start monitoring Enterasys Networks wireless AP/controller (legacy, later Extreme Networks) (802.11 extensions, WEP/link-test) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ENTERASYS-IEEE802DOT11EXT-MIB::etsysDot11ExtBridgeMode OID value, configure state conditions and alerts, and monitor any Enterasys Networks wireless AP/controller (legacy, later Extreme Networks) (802.11 extensions, WEP/link-test) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5624 | enterasys | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1 | etsysMibs | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1.2 | etsysModules | ENTERASYS-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5624.1.2.9 | etsysDot11ExtMIB | ENTERASYS-IEEE802DOT11EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.9.1 | etsysDot11ExtObjects | ENTERASYS-IEEE802DOT11EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.9.1.2 | etsysDot11ExtGeneral | ENTERASYS-IEEE802DOT11EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.9.1.2.1 | etsysDot11ExtGeneralTable | ENTERASYS-IEEE802DOT11EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.9.1.2.1.1 | etsysDot11ExtGeneralEntry | ENTERASYS-IEEE802DOT11EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.9.1.2.1.1.3 | etsysDot11ExtBridgeMode | ENTERASYS-IEEE802DOT11EXT-MIB |