All MIBs › ENTERASYS-IEEE802DOT11EXT-MIB › etsysDot11ExtBldgMPActivationKey
etsysDot11ExtBldgMPActivationKey
Module: ENTERASYS-IEEE802DOT11EXT-MIB
OID (symbolic): ENTERASYS-IEEE802DOT11EXT-MIB::etsysDot11ExtBldgMPActivationKey
OID (numeric): 1.3.6.1.4.1.5624.1.2.9.1.3.1.1.7
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: Point-to-multipoint bridge mode requires an activation key to enable. A valid multipoint activation key must be entered as a string of ACSCII characters translating to the binary HEX value of the key before the Access Point will accept the point-to-multipoint bridge mode setting.
Returns SNMP_BAD_VALUE if validation fails.
This object must be saved across a system reset and/or a power cycle.
What is etsysDot11ExtBldgMPActivationKey?
A 16-byte activation key that must be set to a valid value, entered as ASCII characters representing the key's HEX value, before the AP will accept point-to-multipoint bridge mode; an invalid key returns SNMP_BAD_VALUE. This is effectively a license/feature-unlock key for the multipoint bridging feature, and it persists across resets.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.9.1.3.1.1.7 snmpwalk -v2c -c public <target> ENTERASYS-IEEE802DOT11EXT-MIB::etsysDot11ExtBldgMPActivationKey
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.9.1.3.1.1.7.1 snmpget -v2c -c public <target> ENTERASYS-IEEE802DOT11EXT-MIB::etsysDot11ExtBldgMPActivationKey.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5624.1.2.9.1.3.1.1.7.1 s <value>
Start monitoring Enterasys Networks wireless AP/controller (legacy, later Extreme Networks) (802.11 extensions, WEP/link-test) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ENTERASYS-IEEE802DOT11EXT-MIB::etsysDot11ExtBldgMPActivationKey OID value, configure state conditions and alerts, and monitor any Enterasys Networks wireless AP/controller (legacy, later Extreme Networks) (802.11 extensions, WEP/link-test) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5624 | enterasys | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1 | etsysMibs | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1.2 | etsysModules | ENTERASYS-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5624.1.2.9 | etsysDot11ExtMIB | ENTERASYS-IEEE802DOT11EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.9.1 | etsysDot11ExtObjects | ENTERASYS-IEEE802DOT11EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.9.1.3 | etsysDot11ExtBldg | ENTERASYS-IEEE802DOT11EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.9.1.3.1 | etsysDot11ExtBldgTable | ENTERASYS-IEEE802DOT11EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.9.1.3.1.1 | etsysDot11ExtBldgEntry | ENTERASYS-IEEE802DOT11EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.9.1.3.1.1.7 | etsysDot11ExtBldgMPActivationKey | ENTERASYS-IEEE802DOT11EXT-MIB |