All MIBs › ENTERASYS-IEEE8023-LAG-MIB-EXT-MIB › etsysDot3adAggGlobalFormSinglePortLags
etsysDot3adAggGlobalFormSinglePortLags
Module: ENTERASYS-IEEE8023-LAG-MIB-EXT-MIB
OID (symbolic): ENTERASYS-IEEE8023-LAG-MIB-EXT-MIB::etsysDot3adAggGlobalFormSinglePortLags
OID (numeric): 1.3.6.1.4.1.5624.1.2.35.1.1.2
Node type: OBJECT-TYPE
Type: EnabledStatus
Access: read-write
Description: The ability of forming single port Link Aggregation Groups on this entity. If enabled(1) Link Aggregation Groups can form with 1 port, otherwise 2 or more ports are required.
What is etsysDot3adAggGlobalFormSinglePortLags?
This setting controls whether the switch is allowed to form a link aggregation group consisting of just a single port, instead of requiring at least two ports. An admin enables this in scenarios like pre-provisioning a LAG or interoperating with equipment that expects a LAG-formatted interface even before a second link is added. Setting this to enabled(1) would let the switch treat one lone active port as a valid one-port LACP aggregation rather than rejecting it until a second port joins.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.35.1.1.2 snmpwalk -v2c -c public <target> ENTERASYS-IEEE8023-LAG-MIB-EXT-MIB::etsysDot3adAggGlobalFormSinglePortLags
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.35.1.1.2.1 snmpget -v2c -c public <target> ENTERASYS-IEEE8023-LAG-MIB-EXT-MIB::etsysDot3adAggGlobalFormSinglePortLags.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5624.1.2.35.1.1.2.1 s <value>
Start monitoring Enterasys Networks switch (legacy, later Extreme Networks) (802.3ad LAG extensions) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ENTERASYS-IEEE8023-LAG-MIB-EXT-MIB::etsysDot3adAggGlobalFormSinglePortLags OID value, configure state conditions and alerts, and monitor any Enterasys Networks switch (legacy, later Extreme Networks) (802.3ad LAG extensions) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5624 | enterasys | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1 | etsysMibs | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1.2 | etsysModules | ENTERASYS-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5624.1.2.35 | etsysIeee8023LagMibExtMIB | ENTERASYS-IEEE8023-LAG-MIB-EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.35.1 | etsysIeee8023LagMibExt | ENTERASYS-IEEE8023-LAG-MIB-EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.35.1.1 | etsysDot3adAggGlobal | ENTERASYS-IEEE8023-LAG-MIB-EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.35.1.1.2 | etsysDot3adAggGlobalFormSinglePortLags | ENTERASYS-IEEE8023-LAG-MIB-EXT-MIB |