All MIBs › ENTERASYS-IEEE8021-Q-BRIDGE-MIB-EXT-MIB › etsysIeee8021QVlanMvrpRestrictedStatus
etsysIeee8021QVlanMvrpRestrictedStatus
Module: ENTERASYS-IEEE8021-Q-BRIDGE-MIB-EXT-MIB
OID (symbolic): ENTERASYS-IEEE8021-Q-BRIDGE-MIB-EXT-MIB::etsysIeee8021QVlanMvrpRestrictedStatus
OID (numeric): 1.3.6.1.4.1.5624.1.2.88.1.1.1.1.3
Node type: OBJECT-TYPE
Type: EnabledStatus
Access: read-write
Description: The state of restricted MVRP operation for this VLAN. The value enabled(1) indicates that restricted MVRP operation is enabled for this VLAN. This object affects MVRP Applicant and Registrar state machines for this VLAN on all ports. If restricted MVRP is enabled for a VLAN the following rules are applied:
1. If MVRP is globally enabled and
2. If MVRP is enabled at the port level, then
3. Any ports that were members of the dot1qVlanCurrentEgressPorts table due to MVRP will signal to remove this registration and no further registration requests received in MVRP PDUs for this VLAN will be processed and
4. Any ports that were propagating registration information for this VLAN will cease propagation and all further MVRP PDUs transmitted after the initial withdrawal attempt will not include event notifications for this VLAN.
What is etsysIeee8021QVlanMvrpRestrictedStatus?
This read-write EnabledStatus (default disabled) controls restricted MVRP operation for a VLAN; when enabled, and both MVRP-global and MVRP-port are enabled, ports that gained VLAN membership dynamically via MVRP withdraw that registration, further MVRP registration requests for the VLAN are ignored, and propagation of that VLAN's registration information ceases. Admins enable this on sensitive VLANs to prevent them from being dynamically propagated or joined via MVRP, effectively locking membership to static configuration. For example, enabling this on a management VLAN prevents it from being accidentally extended to a new switch via MVRP auto-registration.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.88.1.1.1.1.3 snmpwalk -v2c -c public <target> ENTERASYS-IEEE8021-Q-BRIDGE-MIB-EXT-MIB::etsysIeee8021QVlanMvrpRestrictedStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.88.1.1.1.1.3.1 snmpget -v2c -c public <target> ENTERASYS-IEEE8021-Q-BRIDGE-MIB-EXT-MIB::etsysIeee8021QVlanMvrpRestrictedStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5624.1.2.88.1.1.1.1.3.1 s <value>
Start monitoring Enterasys Networks switch (legacy, later Extreme Networks) (802.1Q Bridge MIB extensions, MVRP/FDB) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ENTERASYS-IEEE8021-Q-BRIDGE-MIB-EXT-MIB::etsysIeee8021QVlanMvrpRestrictedStatus OID value, configure state conditions and alerts, and monitor any Enterasys Networks switch (legacy, later Extreme Networks) (802.1Q Bridge MIB extensions, MVRP/FDB) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5624 | enterasys | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1 | etsysMibs | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1.2 | etsysModules | ENTERASYS-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5624.1.2.88 | etsysIeee8021QBridgeMibExtMIB | ENTERASYS-IEEE8021-Q-BRIDGE-MIB-EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.88.1 | etsysIeee8021QBridgeMibExtObjects | ENTERASYS-IEEE8021-Q-BRIDGE-MIB-EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.88.1.1 | etsysIeee8021QBridgeMibExtMvrpBranch | ENTERASYS-IEEE8021-Q-BRIDGE-MIB-EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.88.1.1.1 | etsysIeee8021QVlanMvrpRestrictedTable | ENTERASYS-IEEE8021-Q-BRIDGE-MIB-EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.88.1.1.1.1 | etsysIeee8021QVlanMvrpRestrictedEntry | ENTERASYS-IEEE8021-Q-BRIDGE-MIB-EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.88.1.1.1.1.3 | etsysIeee8021QVlanMvrpRestrictedStatus | ENTERASYS-IEEE8021-Q-BRIDGE-MIB-EXT-MIB |