All MIBs › ENTERASYS-ESWITCH-MIB › etsysESwitchRateLimitSwitch
etsysESwitchRateLimitSwitch
Module: ENTERASYS-ESWITCH-MIB
OID (symbolic): ENTERASYS-ESWITCH-MIB::etsysESwitchRateLimitSwitch
OID (numeric): 1.3.6.1.4.1.5624.1.2.10.1.2.1.1.1
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: DURABLE: By default, rate limiting will be disabled. It can be enabled by setting this object to 'true(1)'.
What is etsysESwitchRateLimitSwitch?
This durable TruthValue turns multicast rate limiting on or off for the bridge port identified by the table's ifIndex. An admin sets it to true(1) to activate rate limiting on a port, guarding against a broadcast or multicast storm spreading across the LAN connected to that bridge port, since the feature ships disabled by default. An admin seeing repeated multicast storms on a port would set etsysESwitchRateLimitSwitch to true(1) for that ifIndex, then configure etsysESwitchRateLimit to cap the frame rate.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.10.1.2.1.1.1 snmpwalk -v2c -c public <target> ENTERASYS-ESWITCH-MIB::etsysESwitchRateLimitSwitch
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.10.1.2.1.1.1.1 snmpget -v2c -c public <target> ENTERASYS-ESWITCH-MIB::etsysESwitchRateLimitSwitch.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5624.1.2.10.1.2.1.1.1.1 s <value>
Start monitoring Enterasys Networks switch (legacy, later Extreme Networks) (EtherType filtering/protocol-based VLAN classification) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ENTERASYS-ESWITCH-MIB::etsysESwitchRateLimitSwitch OID value, configure state conditions and alerts, and monitor any Enterasys Networks switch (legacy, later Extreme Networks) (EtherType filtering/protocol-based VLAN classification) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5624 | enterasys | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1 | etsysMibs | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1.2 | etsysModules | ENTERASYS-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5624.1.2.10 | enterasysESwitchMIB | ENTERASYS-ESWITCH-MIB |
| 1.3.6.1.4.1.5624.1.2.10.1 | etsysESwitchObjects | ENTERASYS-ESWITCH-MIB |
| 1.3.6.1.4.1.5624.1.2.10.1.2 | etsysESwitchRateLimiting | ENTERASYS-ESWITCH-MIB |
| 1.3.6.1.4.1.5624.1.2.10.1.2.1 | etsysESwitchRateLimitingTable | ENTERASYS-ESWITCH-MIB |
| 1.3.6.1.4.1.5624.1.2.10.1.2.1.1 | etsysESwitchRateLimitingEntry | ENTERASYS-ESWITCH-MIB |
| 1.3.6.1.4.1.5624.1.2.10.1.2.1.1.1 | etsysESwitchRateLimitSwitch | ENTERASYS-ESWITCH-MIB |