All MIBs › ENTERASYS-ESWITCH-MIB › etsysESwitchAdminStatus
etsysESwitchAdminStatus
Module: ENTERASYS-ESWITCH-MIB
OID (symbolic): ENTERASYS-ESWITCH-MIB::etsysESwitchAdminStatus
OID (numeric): 1.3.6.1.4.1.5624.1.2.10.1.1.1
Node type: OBJECT-TYPE
Type: EnabledStatus
Access: read-write
Description: DURABLE: The meanings of the values are:
enabled(1) - setting this object to enabled causes the device to begin it's power up sequence and attempt to enter its operational state. If the value of this object was disabled, then the non-volatile value of this object is changed to enabled. As part of the power up sequence, the device's management parameters may or may not be reset. (In other words, the device may go through the equivalent of a reset or before returning to the online state. If the device is capable of going directly from the disabled state to the enabled state without resetting any of its management parameters, then it may do so. Such action is product specific.)
disabled(2) - setting this object to offline causes the device to cease network activity and enter a quiescent state. A disabled device must still be able to respond to management messages.
The value enable(1) or disable(2) shall be stored in non-volatile memory for the initial reset value of this variable. The factory default NV value is enable(1).
What is etsysESwitchAdminStatus?
This EnabledStatus object is a durable, persisted administrative switch that controls whether the Enterasys device powers up into its operational state or ceases network activity and enters a quiescent state. An admin sets it to disabled(2) to take the device offline while it remains reachable for management, and back to enabled(1) to bring it through its power-up sequence into service, with the last setting stored in non-volatile memory as the reset default. Setting etsysESwitchAdminStatus to disabled(2) before maintenance quiets the switch's network activity while SNMP management access remains available.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.10.1.1.1 snmpwalk -v2c -c public <target> ENTERASYS-ESWITCH-MIB::etsysESwitchAdminStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.10.1.1.1.1 snmpget -v2c -c public <target> ENTERASYS-ESWITCH-MIB::etsysESwitchAdminStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5624.1.2.10.1.1.1.1 s <value>
Start monitoring Enterasys Networks switch (legacy, later Extreme Networks) (EtherType filtering/protocol-based VLAN classification) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ENTERASYS-ESWITCH-MIB::etsysESwitchAdminStatus OID value, configure state conditions and alerts, and monitor any Enterasys Networks switch (legacy, later Extreme Networks) (EtherType filtering/protocol-based VLAN classification) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5624 | enterasys | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1 | etsysMibs | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1.2 | etsysModules | ENTERASYS-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5624.1.2.10 | enterasysESwitchMIB | ENTERASYS-ESWITCH-MIB |
| 1.3.6.1.4.1.5624.1.2.10.1 | etsysESwitchObjects | ENTERASYS-ESWITCH-MIB |
| 1.3.6.1.4.1.5624.1.2.10.1.1 | etsysESwitchParams | ENTERASYS-ESWITCH-MIB |
| 1.3.6.1.4.1.5624.1.2.10.1.1.1 | etsysESwitchAdminStatus | ENTERASYS-ESWITCH-MIB |