ENTERASYS-ANTI-SPOOF-MIB :: etsysAntiSpoofSystemSnmpNotifications

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › ENTERASYS-ANTI-SPOOF-MIB › etsysAntiSpoofSystemSnmpNotifications

etsysAntiSpoofSystemSnmpNotifications

Module: ENTERASYS-ANTI-SPOOF-MIB

OID (symbolic): ENTERASYS-ANTI-SPOOF-MIB::etsysAntiSpoofSystemSnmpNotifications

OID (numeric): 1.3.6.1.4.1.5624.1.2.96.1.1.4

Node type: OBJECT-TYPE

Type: EnabledStatus

Access: read-write

Description: The current state of the SNMP Notification functionality in the Anti Spoofing feature.

enabled (1) - Anti-Spoofing will generate SNMP Notifications for user IP address or port changes that exceed the configured limits. The Anti-Spoofing feature MUST be enabled for SNMP Notifications to be generated.

disabled (2) - Anti-Spoofing will not generate SNMP Notifications under any conditions.

A notification is generated when a value is first detected above its respective configured limit. That notification SHOULD NOT be generated again until the configured notification timeout period has elapsed.

Agents are not required to generate SNMP Notifications for conditions that exist when this object is set to enabled. SNMP Notifications MAY only be generated after additional IP address changes are detected that exceed the configured limits for the user.

Maintaining the value of this object across agent reboots is REQUIRED.

What is etsysAntiSpoofSystemSnmpNotifications?

Enables or disables SNMP trap generation for Anti-Spoofing threshold violations (IP or port changes exceeding configured limits); traps are only sent when this is enabled and the overall feature (etsysAntiSpoofSystemState) is also enabled, and repeat notifications are throttled by etsysAntiSpoofSystemNotificationInterval.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.96.1.1.4
snmpwalk -v2c -c public <target> ENTERASYS-ANTI-SPOOF-MIB::etsysAntiSpoofSystemSnmpNotifications

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.96.1.1.4.1
snmpget -v2c -c public <target> ENTERASYS-ANTI-SPOOF-MIB::etsysAntiSpoofSystemSnmpNotifications.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.5624.1.2.96.1.1.4.1 s <value>

Start monitoring Enterasys Networks switch (legacy, later Extreme Networks) (anti-spoofing/DHCP verification) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ENTERASYS-ANTI-SPOOF-MIB::etsysAntiSpoofSystemSnmpNotifications OID value, configure state conditions and alerts, and monitor any Enterasys Networks switch (legacy, later Extreme Networks) (anti-spoofing/DHCP verification) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.5624enterasysENTERASYS-MIB-NAMES
1.3.6.1.4.1.5624.1etsysMibsENTERASYS-MIB-NAMES
1.3.6.1.4.1.5624.1.2etsysModulesENTERASYS-MIB-NAMES
Numeric OIDNameModule
1.3.6.1.4.1.5624.1.2.96etsysAntiSpoofMIBENTERASYS-ANTI-SPOOF-MIB
1.3.6.1.4.1.5624.1.2.96.1etsysAntiSpoofObjectsENTERASYS-ANTI-SPOOF-MIB
1.3.6.1.4.1.5624.1.2.96.1.1etsysAntiSpoofSystemBranchENTERASYS-ANTI-SPOOF-MIB
1.3.6.1.4.1.5624.1.2.96.1.1.4etsysAntiSpoofSystemSnmpNotificationsENTERASYS-ANTI-SPOOF-MIB