All MIBs › ENLOGIC-PDU-MIB › pduUnitConfigAlarmStateChangeDelay
pduUnitConfigAlarmStateChangeDelay
Module: ENLOGIC-PDU-MIB
OID (symbolic): ENLOGIC-PDU-MIB::pduUnitConfigAlarmStateChangeDelay
OID (numeric): 1.3.6.1.4.1.38446.1.2.2.1.12
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: The delay measured in samples before a state is asserted. If the value is zero, then the state is asserted as soon as it is detected; if it is non-zero, say n, then the assertion condition must exist for n+1 consecutive samples before the corresponding assertion event is reported.
What is pduUnitConfigAlarmStateChangeDelay?
The number of consecutive over/under-threshold samples required before a PDU power alarm is actually asserted; 0 means assert immediately. Admins raise this value to filter out brief power spikes from triggering a false alarm.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.38446.1.2.2.1.12 snmpwalk -v2c -c public <target> ENLOGIC-PDU-MIB::pduUnitConfigAlarmStateChangeDelay
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.38446.1.2.2.1.12.1 snmpget -v2c -c public <target> ENLOGIC-PDU-MIB::pduUnitConfigAlarmStateChangeDelay.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.38446.1.2.2.1.12.1 i <value>
Start monitoring Enlogic intelligent Power Distribution Unit (PDU) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ENLOGIC-PDU-MIB::pduUnitConfigAlarmStateChangeDelay OID value, configure state conditions and alerts, and monitor any Enlogic intelligent Power Distribution Unit (PDU) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.38446 | enlogic | ENLOGIC-PDU-MIB |
| 1.3.6.1.4.1.38446.1 | pdu | ENLOGIC-PDU-MIB |
| 1.3.6.1.4.1.38446.1.2 | pduUnit | ENLOGIC-PDU-MIB |
| 1.3.6.1.4.1.38446.1.2.2 | pduUnitConfigTable | ENLOGIC-PDU-MIB |
| 1.3.6.1.4.1.38446.1.2.2.1 | pduUnitConfigEntry | ENLOGIC-PDU-MIB |
| 1.3.6.1.4.1.38446.1.2.2.1.12 | pduUnitConfigAlarmStateChangeDelay | ENLOGIC-PDU-MIB |