All MIBs › ENLOGIC-PDU-MIB › pduInputPhaseConfigOverloadRestriction
pduInputPhaseConfigOverloadRestriction
Module: ENLOGIC-PDU-MIB
OID (symbolic): ENLOGIC-PDU-MIB::pduInputPhaseConfigOverloadRestriction
OID (numeric): 1.3.6.1.4.1.38446.1.3.2.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This OID controls the behavior of a Switched PDU Input Phase when an overload condition is possible and additional outlets are requested to be turned on. Setting this OID to alwaysAllowTurnON (1) will always allow the outlets on the corresponding Input Phase to turn on. Setting this OID to restrictOnUpperWarning (2) will not allow outlets on the corresponding Input Phase to turn on if the pduInputPhaseConfigUpperWarningThreshold OID is exceeded. Setting this OID to restrictOnUpperCritical (3) will not allow outlets on the corresponding Input Phase to turn on if the pduInputPhaseConfigUpperCriticalThreshold OID is exceeded. Models that do not support this feature will respond to this OID with a value of notSupported (4). Attempts to set this OID in these models will fail.
What is pduInputPhaseConfigOverloadRestriction?
Controls whether additional outlets on this input phase may be switched on when the phase is near overload: alwaysAllowTurnOn(1) never blocks it, restrictOnUpperWarning(2) blocks new turn-ons once the warning threshold is exceeded, and restrictOnUpperCritical(3) blocks only at the critical threshold. Admins set this to restrictOnUpperWarning on a heavily loaded phase to stop operators from accidentally tripping the breaker by turning on more gear.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.38446.1.3.2.1.3 snmpwalk -v2c -c public <target> ENLOGIC-PDU-MIB::pduInputPhaseConfigOverloadRestriction
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.38446.1.3.2.1.3.1 snmpget -v2c -c public <target> ENLOGIC-PDU-MIB::pduInputPhaseConfigOverloadRestriction.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.38446.1.3.2.1.3.1 i <value>
Start monitoring Enlogic intelligent Power Distribution Unit (PDU) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ENLOGIC-PDU-MIB::pduInputPhaseConfigOverloadRestriction OID value, configure state conditions and alerts, and monitor any Enlogic intelligent Power Distribution Unit (PDU) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.38446 | enlogic | ENLOGIC-PDU-MIB |
| 1.3.6.1.4.1.38446.1 | pdu | ENLOGIC-PDU-MIB |
| 1.3.6.1.4.1.38446.1.3 | pduInputPhase | ENLOGIC-PDU-MIB |
| 1.3.6.1.4.1.38446.1.3.2 | pduInputPhaseConfigTable | ENLOGIC-PDU-MIB |
| 1.3.6.1.4.1.38446.1.3.2.1 | pduInputPhaseConfigEntry | ENLOGIC-PDU-MIB |
| 1.3.6.1.4.1.38446.1.3.2.1.3 | pduInputPhaseConfigOverloadRestriction | ENLOGIC-PDU-MIB |