All MIBs › ENLOGIC-PDU-MIB › pduInputPhaseConfigCurrentAlarmStateChangeDelay
pduInputPhaseConfigCurrentAlarmStateChangeDelay
Module: ENLOGIC-PDU-MIB
OID (symbolic): ENLOGIC-PDU-MIB::pduInputPhaseConfigCurrentAlarmStateChangeDelay
OID (numeric): 1.3.6.1.4.1.38446.1.3.2.1.13
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The delay measured in samples before a current state is asserted. If the value is zero, then the state is asserted as soon as it is detected; if it is non-zero, say n, then the assertion condition must exist for n+1 consecutive samples before the corresponding assertion event is reported.
What is pduInputPhaseConfigCurrentAlarmStateChangeDelay?
The number of consecutive samples a phase current reading must stay past a threshold before the alarm is actually asserted; 0 means assert immediately. Admins raise it to ride through brief current spikes, such as inrush current from equipment powering on, without false-alarming.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.38446.1.3.2.1.13 snmpwalk -v2c -c public <target> ENLOGIC-PDU-MIB::pduInputPhaseConfigCurrentAlarmStateChangeDelay
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.38446.1.3.2.1.13.1 snmpget -v2c -c public <target> ENLOGIC-PDU-MIB::pduInputPhaseConfigCurrentAlarmStateChangeDelay.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.38446.1.3.2.1.13.1 i <value>
Start monitoring Enlogic intelligent Power Distribution Unit (PDU) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ENLOGIC-PDU-MIB::pduInputPhaseConfigCurrentAlarmStateChangeDelay OID value, configure state conditions and alerts, and monitor any Enlogic intelligent Power Distribution Unit (PDU) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.38446 | enlogic | ENLOGIC-PDU-MIB |
| 1.3.6.1.4.1.38446.1 | pdu | ENLOGIC-PDU-MIB |
| 1.3.6.1.4.1.38446.1.3 | pduInputPhase | ENLOGIC-PDU-MIB |
| 1.3.6.1.4.1.38446.1.3.2 | pduInputPhaseConfigTable | ENLOGIC-PDU-MIB |
| 1.3.6.1.4.1.38446.1.3.2.1 | pduInputPhaseConfigEntry | ENLOGIC-PDU-MIB |
| 1.3.6.1.4.1.38446.1.3.2.1.13 | pduInputPhaseConfigCurrentAlarmStateChangeDelay | ENLOGIC-PDU-MIB |