ELTEX-MES-eltBrgMulticast-MIB :: eltIgmpMldSnoopVlanReplaceSourceIp

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › ELTEX-MES-eltBrgMulticast-MIB › eltIgmpMldSnoopVlanReplaceSourceIp

eltIgmpMldSnoopVlanReplaceSourceIp

Module: ELTEX-MES-eltBrgMulticast-MIB

OID (symbolic): ELTEX-MES-eltBrgMulticast-MIB::eltIgmpMldSnoopVlanReplaceSourceIp

OID (numeric): 1.3.6.1.4.1.35265.1.23.55.5.5.1.3

Node type: OBJECT-TYPE

Type: InetAddress

Access: read-write

Description: Before forwarding the report packet sent by the host, the source IP address in the packet will be replaced by this IP address. Default value of 0.0.0.0 means that the source IP address will not be replaced.

What is eltIgmpMldSnoopVlanReplaceSourceIp?

This is the IP address the switch substitutes as the source address of IGMP/MLD report packets it forwards upstream, with the default 0.0.0.0 meaning the original host address is left untouched. An admin configures this to normalize the source IP seen by an upstream multicast router, useful when a proxy-like relay behavior is desired for the reports the switch relays. Setting this to 10.0.0.1 would cause the switch to rewrite every relayed IGMP report's source address to 10.0.0.1 before forwarding it upstream.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.35265.1.23.55.5.5.1.3
snmpwalk -v2c -c public <target> ELTEX-MES-eltBrgMulticast-MIB::eltIgmpMldSnoopVlanReplaceSourceIp

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.35265.1.23.55.5.5.1.3.1
snmpget -v2c -c public <target> ELTEX-MES-eltBrgMulticast-MIB::eltIgmpMldSnoopVlanReplaceSourceIp.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.35265.1.23.55.5.5.1.3.1 s <value>

Start monitoring Eltex MES-series Ethernet switch (IGMP/MLD snooping, MVR) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ELTEX-MES-eltBrgMulticast-MIB::eltIgmpMldSnoopVlanReplaceSourceIp OID value, configure state conditions and alerts, and monitor any Eltex MES-series Ethernet switch (IGMP/MLD snooping, MVR) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.35265eltexLtdELTEX-SMI-ACTUAL
1.3.6.1.4.1.35265.1elHardwareELTEX-SMI-ACTUAL
1.3.6.1.4.1.35265.1.23eltMesELTEX-MES
1.3.6.1.4.1.35265.1.23.55eltMesMacMulticastELTEX-MES
Numeric OIDNameModule
1.3.6.1.4.1.35265.1.23.55.5eltMesMldSnoopELTEX-MES-eltBrgMulticast-MIB
1.3.6.1.4.1.35265.1.23.55.5.5eltIgmpMldSnoopVlanTableELTEX-MES-eltBrgMulticast-MIB
1.3.6.1.4.1.35265.1.23.55.5.5.1eltIgmpMldSnoopVlanEntryELTEX-MES-eltBrgMulticast-MIB
1.3.6.1.4.1.35265.1.23.55.5.5.1.3eltIgmpMldSnoopVlanReplaceSourceIpELTEX-MES-eltBrgMulticast-MIB