ELTEX-MES-PHYSICAL-DESCRIPTION-MIB :: eltPhdTransceiverThresholdTimer

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › ELTEX-MES-PHYSICAL-DESCRIPTION-MIB › eltPhdTransceiverThresholdTimer

eltPhdTransceiverThresholdTimer

Module: ELTEX-MES-PHYSICAL-DESCRIPTION-MIB

OID (symbolic): ELTEX-MES-PHYSICAL-DESCRIPTION-MIB::eltPhdTransceiverThresholdTimer

OID (numeric): 1.3.6.1.4.1.35265.1.23.53.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Time between 2 generation of snmp/syslog alarm/warning messages in seconds (30-3600) Timer value must be in multiples of 10.

What is eltPhdTransceiverThresholdTimer?

This read-write integer, in seconds from 30 to 3600 in multiples of 10 with a default of 120, sets how frequently the switch can regenerate SNMP or syslog alarm/warning messages for the same transceiver condition. Admins tune this to avoid alert flooding when a transceiver parameter hovers near a threshold. For example, raising this from the default 120 to 600 would reduce repeated alert notifications to once every 10 minutes for a persistently marginal reading.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.35265.1.23.53.1.3
snmpwalk -v2c -c public <target> ELTEX-MES-PHYSICAL-DESCRIPTION-MIB::eltPhdTransceiverThresholdTimer

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.35265.1.23.53.1.3.1
snmpget -v2c -c public <target> ELTEX-MES-PHYSICAL-DESCRIPTION-MIB::eltPhdTransceiverThresholdTimer.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.35265.1.23.53.1.3.1 i <value>

Start monitoring Eltex MES-series switch (SFP/transceiver inventory) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ELTEX-MES-PHYSICAL-DESCRIPTION-MIB::eltPhdTransceiverThresholdTimer OID value, configure state conditions and alerts, and monitor any Eltex MES-series switch (SFP/transceiver inventory) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.35265eltexLtdELTEX-SMI-ACTUAL
1.3.6.1.4.1.35265.1elHardwareELTEX-SMI-ACTUAL
1.3.6.1.4.1.35265.1.23eltMesELTEX-MES
1.3.6.1.4.1.35265.1.23.53eltMesPhdTransceiverELTEX-MES
Numeric OIDNameModule
1.3.6.1.4.1.35265.1.23.53.1eltMesPhdTransceiverELTEX-MES-PHYSICAL-DESCRIPTION-MIB
1.3.6.1.4.1.35265.1.23.53.1.3eltPhdTransceiverThresholdTimerELTEX-MES-PHYSICAL-DESCRIPTION-MIB