ELTEX-MES-PHYSICAL-DESCRIPTION-MIB :: eltPhdTransceiverInfoFiberDiameterType

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › ELTEX-MES-PHYSICAL-DESCRIPTION-MIB › eltPhdTransceiverInfoFiberDiameterType

eltPhdTransceiverInfoFiberDiameterType

Module: ELTEX-MES-PHYSICAL-DESCRIPTION-MIB

OID (symbolic): ELTEX-MES-PHYSICAL-DESCRIPTION-MIB::eltPhdTransceiverInfoFiberDiameterType

OID (numeric): 1.3.6.1.4.1.35265.1.23.53.1.1.1.7

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The diameter of the fiber, measured in micron. fiber9 - 9 micron multi-mode fiber fiber50 - 50 micron multi-mode fiber fiber625 - 62.5 micron multi-mode fiber copper - copper cable.

What is eltPhdTransceiverInfoFiberDiameterType?

This read-only enumerated object reports the fiber core diameter type the transceiver is designed for, such as fiber9(1) for 9-micron single-mode, fiber50(2) or fiber625(3) for multi-mode, copper(4), or unknown(65535). Admins use this to confirm the transceiver matches the fiber type actually installed in the plant. For example, seeing fiber625(3) on a transceiver connected to newer 50-micron cabling would explain reduced link distance or signal quality due to a fiber-type mismatch.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.35265.1.23.53.1.1.1.7
snmpwalk -v2c -c public <target> ELTEX-MES-PHYSICAL-DESCRIPTION-MIB::eltPhdTransceiverInfoFiberDiameterType

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.35265.1.23.53.1.1.1.7.1
snmpget -v2c -c public <target> ELTEX-MES-PHYSICAL-DESCRIPTION-MIB::eltPhdTransceiverInfoFiberDiameterType.1

Start monitoring Eltex MES-series switch (SFP/transceiver inventory) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ELTEX-MES-PHYSICAL-DESCRIPTION-MIB::eltPhdTransceiverInfoFiberDiameterType OID value, configure state conditions and alerts, and monitor any Eltex MES-series switch (SFP/transceiver inventory) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.35265eltexLtdELTEX-SMI-ACTUAL
1.3.6.1.4.1.35265.1elHardwareELTEX-SMI-ACTUAL
1.3.6.1.4.1.35265.1.23eltMesELTEX-MES
1.3.6.1.4.1.35265.1.23.53eltMesPhdTransceiverELTEX-MES
Numeric OIDNameModule
1.3.6.1.4.1.35265.1.23.53.1eltMesPhdTransceiverELTEX-MES-PHYSICAL-DESCRIPTION-MIB
1.3.6.1.4.1.35265.1.23.53.1.1eltPhdTransceiverInfoTableELTEX-MES-PHYSICAL-DESCRIPTION-MIB
1.3.6.1.4.1.35265.1.23.53.1.1.1eltPhdTransceiverInfoEntryELTEX-MES-PHYSICAL-DESCRIPTION-MIB
1.3.6.1.4.1.35265.1.23.53.1.1.1.7eltPhdTransceiverInfoFiberDiameterTypeELTEX-MES-PHYSICAL-DESCRIPTION-MIB