All MIBs › ELTEX-MES-L2-TUNNEL-CONFIG-MIB › eltLtcTunneledProtocolType
eltLtcTunneledProtocolType
Module: ELTEX-MES-L2-TUNNEL-CONFIG-MIB
OID (symbolic): ELTEX-MES-L2-TUNNEL-CONFIG-MIB::eltLtcTunneledProtocolType
OID (numeric): 1.3.6.1.4.1.35265.1.23.13.1.2.1.1.1
Node type: OBJECT-TYPE
Type: Bits
Access: read-write
Description: Indicates tunneled protocol of the interface.
If a BIT is set, then the value of the corresponding protocol is tunneled. Specifically, if the 'stp(0)' BIT is set, then the Spanning Tree Protocol PDU is tunneled. At this moment, there are no other supported protocols.
If the bit for a given protocol is set for an interface, then the statistics for that interface and protocol will start to be monitored.
What is eltLtcTunneledProtocolType?
This bitmask value indicates which protocols are tunneled on this interface, where setting the stp(0) bit means Spanning Tree Protocol PDUs are tunneled; setting a bit also starts statistics monitoring for that interface/protocol combination, and STP is currently the only supported protocol. Admins set the stp bit to enable customer STP BPDUs to pass transparently through the provider's L2 tunnel rather than being processed by the local switch. Setting the stp(0) bit on an interface would begin tunneling and monitoring statistics for Spanning Tree PDUs crossing it.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.35265.1.23.13.1.2.1.1.1 snmpwalk -v2c -c public <target> ELTEX-MES-L2-TUNNEL-CONFIG-MIB::eltLtcTunneledProtocolType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.35265.1.23.13.1.2.1.1.1.1 snmpget -v2c -c public <target> ELTEX-MES-L2-TUNNEL-CONFIG-MIB::eltLtcTunneledProtocolType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.35265.1.23.13.1.2.1.1.1.1 s <value>
Start monitoring Eltex MES-series Ethernet switch (Layer 2 protocol tunneling) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ELTEX-MES-L2-TUNNEL-CONFIG-MIB::eltLtcTunneledProtocolType OID value, configure state conditions and alerts, and monitor any Eltex MES-series Ethernet switch (Layer 2 protocol tunneling) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.35265 | eltexLtd | ELTEX-SMI-ACTUAL |
| 1.3.6.1.4.1.35265.1 | elHardware | ELTEX-SMI-ACTUAL |
| 1.3.6.1.4.1.35265.1.23 | eltMes | ELTEX-MES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.35265.1.23.13 | eltMesL2TunnelConfig | ELTEX-MES-L2-TUNNEL-CONFIG-MIB |
| 1.3.6.1.4.1.35265.1.23.13.1 | eltMesLtcMIBObjects | ELTEX-MES-L2-TUNNEL-CONFIG-MIB |
| 1.3.6.1.4.1.35265.1.23.13.1.2 | eltMesLtcTunneledProtocol | ELTEX-MES-L2-TUNNEL-CONFIG-MIB |
| 1.3.6.1.4.1.35265.1.23.13.1.2.1 | eltLtcTunneledProtocolTable | ELTEX-MES-L2-TUNNEL-CONFIG-MIB |
| 1.3.6.1.4.1.35265.1.23.13.1.2.1.1 | eltLtcTunneledProtocolEntry | ELTEX-MES-L2-TUNNEL-CONFIG-MIB |
| 1.3.6.1.4.1.35265.1.23.13.1.2.1.1.1 | eltLtcTunneledProtocolType | ELTEX-MES-L2-TUNNEL-CONFIG-MIB |