All MIBs › ELTEX-MES-L2-TUNNEL-CONFIG-MIB › eltLtcTunnelDropThreshold
eltLtcTunnelDropThreshold
Module: ELTEX-MES-L2-TUNNEL-CONFIG-MIB
OID (symbolic): ELTEX-MES-L2-TUNNEL-CONFIG-MIB::eltLtcTunnelDropThreshold
OID (numeric): 1.3.6.1.4.1.35265.1.23.13.1.3.1.1.2
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: The drop threshold on an interface for a given protocol. After reaching this drop threshold, the interface will start dropping PDUs for the given protocol. This value cannot be greater than the value of eltLtcTunnelShutdownThreshold. A value of 0 indicates that no limit is set.
What is eltLtcTunnelDropThreshold?
This value sets the PDU-rate drop threshold, for a given tunneled protocol on this interface, above which the interface begins dropping that protocol's PDUs; it cannot exceed eltLtcTunnelShutdownThreshold, and a value of 0 means no limit. Admins tune it to protect the interface from being overwhelmed by an abnormal flood of tunneled control-plane traffic, such as a BPDU storm. Setting it to 100 would start dropping tunneled PDUs for that protocol once the rate exceeds 100, before the more severe shutdown threshold is reached.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.35265.1.23.13.1.3.1.1.2 snmpwalk -v2c -c public <target> ELTEX-MES-L2-TUNNEL-CONFIG-MIB::eltLtcTunnelDropThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.35265.1.23.13.1.3.1.1.2.1 snmpget -v2c -c public <target> ELTEX-MES-L2-TUNNEL-CONFIG-MIB::eltLtcTunnelDropThreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.35265.1.23.13.1.3.1.1.2.1 i <value>
Start monitoring Eltex MES-series Ethernet switch (Layer 2 protocol tunneling) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ELTEX-MES-L2-TUNNEL-CONFIG-MIB::eltLtcTunnelDropThreshold OID value, configure state conditions and alerts, and monitor any Eltex MES-series Ethernet switch (Layer 2 protocol tunneling) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.35265 | eltexLtd | ELTEX-SMI-ACTUAL |
| 1.3.6.1.4.1.35265.1 | elHardware | ELTEX-SMI-ACTUAL |
| 1.3.6.1.4.1.35265.1.23 | eltMes | ELTEX-MES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.35265.1.23.13 | eltMesL2TunnelConfig | ELTEX-MES-L2-TUNNEL-CONFIG-MIB |
| 1.3.6.1.4.1.35265.1.23.13.1 | eltMesLtcMIBObjects | ELTEX-MES-L2-TUNNEL-CONFIG-MIB |
| 1.3.6.1.4.1.35265.1.23.13.1.3 | eltMesLtcTunnelThreshold | ELTEX-MES-L2-TUNNEL-CONFIG-MIB |
| 1.3.6.1.4.1.35265.1.23.13.1.3.1 | eltLtcTunnelThresholdTable | ELTEX-MES-L2-TUNNEL-CONFIG-MIB |
| 1.3.6.1.4.1.35265.1.23.13.1.3.1.1 | eltLtcTunnelThresholdEntry | ELTEX-MES-L2-TUNNEL-CONFIG-MIB |
| 1.3.6.1.4.1.35265.1.23.13.1.3.1.1.2 | eltLtcTunnelDropThreshold | ELTEX-MES-L2-TUNNEL-CONFIG-MIB |