All MIBs › ELTEK-DISTRIBUTEDV4-MIB › loadLVD2Enable
loadLVD2Enable
Module: ELTEK-DISTRIBUTEDV4-MIB
OID (symbolic): ELTEK-DISTRIBUTEDV4-MIB::loadLVD2Enable
OID (numeric): 1.3.6.1.4.1.12148.9.4.3.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The status of contactors configuration. 'enabled' means that the contactor is in use. 'disabled' means that the contactor is disconfigured and not in use.
What is loadLVD2Enable?
This shows whether load low-voltage-disconnect contactor 2 is configured for use (enabled) or left unconfigured and inactive (disabled) on this site.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.12148.9.4.3.5 snmpwalk -v2c -c public <target> ELTEK-DISTRIBUTEDV4-MIB::loadLVD2Enable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.12148.9.4.3.5.1 snmpget -v2c -c public <target> ELTEK-DISTRIBUTEDV4-MIB::loadLVD2Enable.1
Start monitoring Eltek DC power-system control unit (Aeongold/AL175/AL6000/SmartPack) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ELTEK-DISTRIBUTEDV4-MIB::loadLVD2Enable OID value, configure state conditions and alerts, and monitor any Eltek DC power-system control unit (Aeongold/AL175/AL6000/SmartPack) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.12148 | eltek | ELTEK-COMMON-MIB |
| 1.3.6.1.4.1.12148.9 | eltekDistributedPlantV7 | ELTEK-DISTRIBUTED-MIB |
| 1.3.6.1.4.1.12148.9.4 | loadDistribution | ELTEK-DISTRIBUTED-MIB |
| 1.3.6.1.4.1.12148.9.4.3 | loadDistributionLVDStatus | ELTEK-DISTRIBUTED-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.12148.9.4.3.5 | loadLVD2Enable | ELTEK-DISTRIBUTEDV4-MIB |