All MIBs › ELTEK-DISTRIBUTEDV4-MIB › batteryBreakerStatus
batteryBreakerStatus
Module: ELTEK-DISTRIBUTEDV4-MIB
OID (symbolic): ELTEK-DISTRIBUTEDV4-MIB::batteryBreakerStatus
OID (numeric): 1.3.6.1.4.1.12148.9.3.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The state of the battery fuses/breakers can be either normal(0) or alarm(1).
What is batteryBreakerStatus?
This reports whether the battery fuses or breakers are in their normal or alarm state. An alarm here typically means a battery string has been electrically disconnected from the DC bus by a blown fuse or tripped breaker, and the plant may be running on reduced battery backup as a result.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.12148.9.3.5 snmpwalk -v2c -c public <target> ELTEK-DISTRIBUTEDV4-MIB::batteryBreakerStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.12148.9.3.5.1 snmpget -v2c -c public <target> ELTEK-DISTRIBUTEDV4-MIB::batteryBreakerStatus.1
Start monitoring Eltek DC power-system control unit (Aeongold/AL175/AL6000/SmartPack) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ELTEK-DISTRIBUTEDV4-MIB::batteryBreakerStatus OID value, configure state conditions and alerts, and monitor any Eltek DC power-system control unit (Aeongold/AL175/AL6000/SmartPack) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.12148 | eltek | ELTEK-COMMON-MIB |
| 1.3.6.1.4.1.12148.9 | eltekDistributedPlantV7 | ELTEK-DISTRIBUTED-MIB |
| 1.3.6.1.4.1.12148.9.3 | battery | ELTEK-DISTRIBUTED-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.12148.9.3.5 | batteryBreakerStatus | ELTEK-DISTRIBUTEDV4-MIB |