All MIBs › ELTEK-DISTRIBUTEDV4-MIB › alarmLVD2open

alarmLVD2open

OID (symbolic): ELTEK-DISTRIBUTEDV4-MIB::alarmLVD2open

OID (numeric): 1.3.6.1.4.1.12148.9.7.1.9

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The load Contactor 2 alarm. The contactor disconnect voltage has been reached and the contactor has disconnected.

What is alarmLVD2open?

This is the well-known alarm indicating load contactor 2 has opened because its disconnect voltage threshold was reached, shedding that load group. Combined with alarmLVD1open, it shows progressively deeper battery discharge during an extended outage.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.12148.9.7.1.9
snmpwalk -v2c -c public <target> ELTEK-DISTRIBUTEDV4-MIB::alarmLVD2open

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.12148.9.7.1.9.1
snmpget -v2c -c public <target> ELTEK-DISTRIBUTEDV4-MIB::alarmLVD2open.1

Start monitoring Eltek DC power-system control unit (Aeongold/AL175/AL6000/SmartPack) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ELTEK-DISTRIBUTEDV4-MIB::alarmLVD2open OID value, configure state conditions and alerts, and monitor any Eltek DC power-system control unit (Aeongold/AL175/AL6000/SmartPack) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.12148	eltek	ELTEK-COMMON-MIB
1.3.6.1.4.1.12148.9	eltekDistributedPlantV7	ELTEK-DISTRIBUTED-MIB
1.3.6.1.4.1.12148.9.7	alarmGroup	ELTEK-DISTRIBUTED-MIB
1.3.6.1.4.1.12148.9.7.1	alarmWellknownAlarms	ELTEK-DISTRIBUTED-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.12148.9.7.1.9	alarmLVD2open	ELTEK-DISTRIBUTEDV4-MIB

ELTEK-DISTRIBUTEDV4-MIB :: alarmLVD2open

alarmLVD2open

Also defined in

Module

This MIB depends on