ELTEK-DISTRIBUTED-PLANTV4-MIB :: alarmLVD3open

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › ELTEK-DISTRIBUTED-PLANTV4-MIB › alarmLVD3open

alarmLVD3open

Module: ELTEK-DISTRIBUTED-PLANTV4-MIB

OID (symbolic): ELTEK-DISTRIBUTED-PLANTV4-MIB::alarmLVD3open

OID (numeric): 1.3.6.1.4.1.12148.9.7.1.10

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The load Contactor 3 alarm. The contactor disconnect voltage has been reached and the contactor has disconnected.

What is alarmLVD3open?

The load Contactor 3 alarm (normal(0)/alarm(1)), tripped once the contactor's disconnect voltage has been reached and it has opened, shedding that load bank. An admin uses this alongside loadLVD3Status to know which specific load bank was shed during a low-voltage event.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.12148.9.7.1.10
snmpwalk -v2c -c public <target> ELTEK-DISTRIBUTED-PLANTV4-MIB::alarmLVD3open

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.12148.9.7.1.10.1
snmpget -v2c -c public <target> ELTEK-DISTRIBUTED-PLANTV4-MIB::alarmLVD3open.1

Start monitoring Eltek telecom DC power systems with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ELTEK-DISTRIBUTED-PLANTV4-MIB::alarmLVD3open OID value, configure state conditions and alerts, and monitor any Eltek telecom DC power systems from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.12148eltekELTEK-COMMON-MIB
1.3.6.1.4.1.12148.9eltekDistributedPlantV7ELTEK-DISTRIBUTED-MIB
1.3.6.1.4.1.12148.9.7alarmGroupELTEK-DISTRIBUTED-MIB
1.3.6.1.4.1.12148.9.7.1alarmWellknownAlarmsELTEK-DISTRIBUTED-MIB
Numeric OIDNameModule
1.3.6.1.4.1.12148.9.7.1.10alarmLVD3openELTEK-DISTRIBUTED-PLANTV4-MIB