ELTEK-DISTRIBUTED-PLANTV4-MIB :: alarmLVD2open

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › ELTEK-DISTRIBUTED-PLANTV4-MIB › alarmLVD2open

alarmLVD2open

Module: ELTEK-DISTRIBUTED-PLANTV4-MIB

OID (symbolic): ELTEK-DISTRIBUTED-PLANTV4-MIB::alarmLVD2open

OID (numeric): 1.3.6.1.4.1.12148.9.7.1.9

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The load Contactor 2 alarm. The contactor disconnect voltage has been reached and the contactor has disconnected.

What is alarmLVD2open?

The load Contactor 2 alarm (normal(0)/alarm(1)), tripped once the contactor's disconnect voltage has been reached and it has opened, shedding that load bank. An admin uses this alongside loadLVD2Status to know which specific load bank was shed during a low-voltage event.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.12148.9.7.1.9
snmpwalk -v2c -c public <target> ELTEK-DISTRIBUTED-PLANTV4-MIB::alarmLVD2open

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.12148.9.7.1.9.1
snmpget -v2c -c public <target> ELTEK-DISTRIBUTED-PLANTV4-MIB::alarmLVD2open.1

Start monitoring Eltek telecom DC power systems with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ELTEK-DISTRIBUTED-PLANTV4-MIB::alarmLVD2open OID value, configure state conditions and alerts, and monitor any Eltek telecom DC power systems from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.12148eltekELTEK-COMMON-MIB
1.3.6.1.4.1.12148.9eltekDistributedPlantV7ELTEK-DISTRIBUTED-MIB
1.3.6.1.4.1.12148.9.7alarmGroupELTEK-DISTRIBUTED-MIB
1.3.6.1.4.1.12148.9.7.1alarmWellknownAlarmsELTEK-DISTRIBUTED-MIB
Numeric OIDNameModule
1.3.6.1.4.1.12148.9.7.1.9alarmLVD2openELTEK-DISTRIBUTED-PLANTV4-MIB