All MIBs › ELTEK-DISTRIBUTED-MIB › batteryBanksSymmetry1enable
batteryBanksSymmetry1enable
Module: ELTEK-DISTRIBUTED-MIB
OID (symbolic): ELTEK-DISTRIBUTED-MIB::batteryBanksSymmetry1enable
OID (numeric): 1.3.6.1.4.1.12148.9.3.19.3.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Enable/Disable the individual symmetry input. If disabled this will read 0 volts and the alarm flag will be turned off.
What is batteryBanksSymmetry1enable?
Enables or disables symmetry monitoring input 1 on this battery bank; when disabled, the input reads 0 volts and its alarm flag is forced off, which an admin uses to mute an unused or physically disconnected symmetry measurement point rather than have it falsely report a fault.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.12148.9.3.19.3.1.2 snmpwalk -v2c -c public <target> ELTEK-DISTRIBUTED-MIB::batteryBanksSymmetry1enable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.12148.9.3.19.3.1.2.1 snmpget -v2c -c public <target> ELTEK-DISTRIBUTED-MIB::batteryBanksSymmetry1enable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.12148.9.3.19.3.1.2.1 i <value>
Start monitoring Eltek SmartPack/WebPower DC power rectifier system with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ELTEK-DISTRIBUTED-MIB::batteryBanksSymmetry1enable OID value, configure state conditions and alerts, and monitor any Eltek SmartPack/WebPower DC power rectifier system from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.12148 | eltek | ELTEK-COMMON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.12148.9 | eltekDistributedPlantV7 | ELTEK-DISTRIBUTED-MIB |
| 1.3.6.1.4.1.12148.9.3 | battery | ELTEK-DISTRIBUTED-MIB |
| 1.3.6.1.4.1.12148.9.3.19 | batteryBanks | ELTEK-DISTRIBUTED-MIB |
| 1.3.6.1.4.1.12148.9.3.19.3 | batteryBanksTable | ELTEK-DISTRIBUTED-MIB |
| 1.3.6.1.4.1.12148.9.3.19.3.1 | batteryBanksEntry | ELTEK-DISTRIBUTED-MIB |
| 1.3.6.1.4.1.12148.9.3.19.3.1.2 | batteryBanksSymmetry1enable | ELTEK-DISTRIBUTED-MIB |