All MIBs › ELTEK-DISTRIBUTED-MIB › alarmLVD1open
alarmLVD1open
Module: ELTEK-DISTRIBUTED-MIB
OID (symbolic): ELTEK-DISTRIBUTED-MIB::alarmLVD1open
OID (numeric): 1.3.6.1.4.1.12148.9.7.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The load Contactor 1 alarm. The contactor disconnect voltage has been reached and the contactor has disconnected.
What is alarmLVD1open?
Reports whether the load contactor 1 alarm is active (normal(0) / alarm(1)); alarm(1) means the contactor's disconnect voltage was reached and it has opened to shed that load bank, which an admin treats as confirmation that load bank 1 lost power during a low-voltage event.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.12148.9.7.1.8 snmpwalk -v2c -c public <target> ELTEK-DISTRIBUTED-MIB::alarmLVD1open
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.12148.9.7.1.8.1 snmpget -v2c -c public <target> ELTEK-DISTRIBUTED-MIB::alarmLVD1open.1
Start monitoring Eltek SmartPack/WebPower DC power rectifier system with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ELTEK-DISTRIBUTED-MIB::alarmLVD1open OID value, configure state conditions and alerts, and monitor any Eltek SmartPack/WebPower DC power rectifier system from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.12148 | eltek | ELTEK-COMMON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.12148.9 | eltekDistributedPlantV7 | ELTEK-DISTRIBUTED-MIB |
| 1.3.6.1.4.1.12148.9.7 | alarmGroup | ELTEK-DISTRIBUTED-MIB |
| 1.3.6.1.4.1.12148.9.7.1 | alarmWellknownAlarms | ELTEK-DISTRIBUTED-MIB |
| 1.3.6.1.4.1.12148.9.7.1.8 | alarmLVD1open | ELTEK-DISTRIBUTED-MIB |