EDGELINK-MIB :: elFMDS1InputAlarmMode

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsEDGELINK-MIBelFMDS1InputAlarmMode

elFMDS1InputAlarmMode

Module: EDGELINK-MIB

OID (symbolic): EDGELINK-MIB::elFMDS1InputAlarmMode

OID (numeric): 1.3.6.1.4.1.564.101.1.9.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This command changes the severity of the DS1 LOS as either Major alarm or status depending on the selection.

What is elFMDS1InputAlarmMode?

This selects whether loss-of-signal on a DS1 input is reported only as a status change or raised as a major alarm. An admin sets this to alarmOnDs1InputLos on channels where signal loss should page someone, versus leaving it as status-only on channels where it's expected or benign.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.564.101.1.9.4
snmpwalk -v2c -c public <target> EDGELINK-MIB::elFMDS1InputAlarmMode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.564.101.1.9.4.1
snmpget -v2c -c public <target> EDGELINK-MIB::elFMDS1InputAlarmMode.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.564.101.1.9.4.1 i <value>

Start monitoring EdgeLink edge access multiplexer (DS1 channelized module) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EDGELINK-MIB::elFMDS1InputAlarmMode OID value, configure state conditions and alerts, and monitor any EdgeLink edge access multiplexer (DS1 channelized module) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.564telcoEDGELINK-MIB
1.3.6.1.4.1.564.101edgeLinkEDGELINK-MIB
1.3.6.1.4.1.564.101.1elM13v1EDGELINK-MIB
1.3.6.1.4.1.564.101.1.9elFMEDGELINK-MIB
1.3.6.1.4.1.564.101.1.9.4elFMDS1InputAlarmModeEDGELINK-MIB