All MIBs › EDGELINK-MIB › elCMDS3ParityMode
elCMDS3ParityMode
Module: EDGELINK-MIB
OID (symbolic): EDGELINK-MIB::elCMDS3ParityMode
OID (numeric): 1.3.6.1.4.1.564.101.1.2.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Select C-bit or P-bit parity mode for DS3 interface. This Object can't be set when ServiceMode is IN-Service
What is elCMDS3ParityMode?
This selects C-bit or P-bit parity framing mode for the DS3 interface, and can only be changed while the DS3 is out-of-service. A technician sets this to match the parity scheme used by the carrier's DS3 facility.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.564.101.1.2.2 snmpwalk -v2c -c public <target> EDGELINK-MIB::elCMDS3ParityMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.564.101.1.2.2.1 snmpget -v2c -c public <target> EDGELINK-MIB::elCMDS3ParityMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.564.101.1.2.2.1 i <value>
Start monitoring EdgeLink edge access multiplexer (DS1 channelized module) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EDGELINK-MIB::elCMDS3ParityMode OID value, configure state conditions and alerts, and monitor any EdgeLink edge access multiplexer (DS1 channelized module) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.564 | telco | EDGELINK-MIB |
| 1.3.6.1.4.1.564.101 | edgeLink | EDGELINK-MIB |
| 1.3.6.1.4.1.564.101.1 | elM13v1 | EDGELINK-MIB |
| 1.3.6.1.4.1.564.101.1.2 | elCM | EDGELINK-MIB |
| 1.3.6.1.4.1.564.101.1.2.2 | elCMDS3ParityMode | EDGELINK-MIB |