All MIBs › EDGELINK-MIB › elCMDS3LoopbackMode
elCMDS3LoopbackMode
Module: EDGELINK-MIB
OID (symbolic): EDGELINK-MIB::elCMDS3LoopbackMode
OID (numeric): 1.3.6.1.4.1.564.101.1.2.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Set the DS3 loopback mode to line, terminal, remote, or none. The System can't be set to ds3LpbkRemoteFacility when it is in M13 Mode. The Terminal LoopBack is feasible only when the elCMDS3TxTiming Object is set to ds3TxTimingLocal.
What is elCMDS3LoopbackMode?
This sets the DS3 interface into a loopback test mode: none, terminal, facility, or remote-facility. Remote-facility loopback can't be used in M13 mode, and terminal loopback only works when elCMDS3TxTiming is set to local timing.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.564.101.1.2.8 snmpwalk -v2c -c public <target> EDGELINK-MIB::elCMDS3LoopbackMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.564.101.1.2.8.1 snmpget -v2c -c public <target> EDGELINK-MIB::elCMDS3LoopbackMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.564.101.1.2.8.1 i <value>
Start monitoring EdgeLink edge access multiplexer (DS1 channelized module) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EDGELINK-MIB::elCMDS3LoopbackMode OID value, configure state conditions and alerts, and monitor any EdgeLink edge access multiplexer (DS1 channelized module) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.564 | telco | EDGELINK-MIB |
| 1.3.6.1.4.1.564.101 | edgeLink | EDGELINK-MIB |
| 1.3.6.1.4.1.564.101.1 | elM13v1 | EDGELINK-MIB |
| 1.3.6.1.4.1.564.101.1.2 | elCM | EDGELINK-MIB |
| 1.3.6.1.4.1.564.101.1.2.8 | elCMDS3LoopbackMode | EDGELINK-MIB |