All MIBs › EDGELINK-MIB › elCMCBitIPSubnetMask
elCMCBitIPSubnetMask
Module: EDGELINK-MIB
OID (symbolic): EDGELINK-MIB::elCMCBitIPSubnetMask
OID (numeric): 1.3.6.1.4.1.564.101.1.3.3
Node type: OBJECT-TYPE
Type: IpAddress
Access: read-write
Description: Specifies the subnet address mask for the C-Bit IP channel.
What is elCMCBitIPSubnetMask?
This is the subnet mask applied to the C-bit channel IP addresses used for partner-to-partner communication between two EdgeLink units over a DS3 link. An installer sets this consistently on both ends so the C-bit IP addressing forms a valid point-to-point subnet.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.564.101.1.3.3 snmpwalk -v2c -c public <target> EDGELINK-MIB::elCMCBitIPSubnetMask
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.564.101.1.3.3.1 snmpget -v2c -c public <target> EDGELINK-MIB::elCMCBitIPSubnetMask.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.564.101.1.3.3.1 a <value>
Start monitoring EdgeLink edge access multiplexer (DS1 channelized module) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EDGELINK-MIB::elCMCBitIPSubnetMask OID value, configure state conditions and alerts, and monitor any EdgeLink edge access multiplexer (DS1 channelized module) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.564 | telco | EDGELINK-MIB |
| 1.3.6.1.4.1.564.101 | edgeLink | EDGELINK-MIB |
| 1.3.6.1.4.1.564.101.1 | elM13v1 | EDGELINK-MIB |
| 1.3.6.1.4.1.564.101.1.3 | elCMIfc | EDGELINK-MIB |
| 1.3.6.1.4.1.564.101.1.3.3 | elCMCBitIPSubnetMask | EDGELINK-MIB |